Professional Lifting Equipment Manufacturer

Small Cargo Lift for Warehouse and Dock, 500 kg

TMB-SC500-403883249

Wall-mounted small cargo lift for warehouses, loading docks and basement stores. Two steel columns carry a fenced platform, lifted by a hydraulic cylinder on chain and steel rope; total height 4 m, platform travel 3 m, platform 800 × 800 mm with an 800 mm guardrail on three sides, load capacity 500 kg, machine weight about 80 kg.

Home/Mast Lift/Small Cargo Lift for Warehouse and Dock, 500 kg
In stock · ready to ship

Small Cargo Lift for Warehouse and Dock, 500 kgSKU: TMB-SC500-403883249

A fenced 800 × 800 mm platform on two columns, 500 kg between a warehouse floor and the level above — 4 m total height, 3 m of lift, and an 80 kg machine that goes up the wall without a shaft.

Load capacity
500 kg
Platform
800 × 800 mm
Total height
4 m · 3 m of lift
Machine weight
80 kg
Price on request
Standard build · 500 kg, 800 × 800 mm platform — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard 500 kg, 800 × 800 mm build and dispatched from our own warehouse. A 100 × 100 cm or 80 × 100 cm platform, a different height or a different colour is built to order — see custom options.
  • ✓
    Built to the specification published here — same two columns, cylinder and fenced platform on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

A fenced platform where a forklift cannot reach

For the store, the dock and the basement where goods have to change level and there is no ramp, no shaft and no room for a forklift — a small platform on the wall, loaded at floor level and raised to the floor above.

01

800 × 800 mm platform, 500 kg

A square deck that takes a pallet or a stack of sacks with the load inside the guardrail. The platform comes down level with the floor, so goods are slid on instead of lifted over a lip.

02

800 mm guardrail on three sides

The fence stands 800 mm high around three sides and stays open on the loading side. Sacks, drums and cartons stay on the deck as the platform rises, and the open side is where the goods come on.

03

Cylinder, chain and steel rope

A hydraulic cylinder between the two columns lifts the carriage, and chain and steel rope carry the platform on both sides. Two columns mean the load is shared and the platform stays level even when it is loaded to one corner.

04

4 m total height, 3 m of lift

The columns stand 4 m and the platform travels 3 m — one storey, with the extra height taken by the carriage and the pulley at the top. Check the headroom above the upper floor before you order.

Specifications

Small cargo lift: technical data

Figures are for the standard build. The drawing below shows the 4 m total height, the 800 × 800 mm platform and the 800 mm guardrail — send us your floor-to-floor height and we confirm the column length against your building.

Lifting & control

Lifting mechanism Hydraulic cylinder between two columns, chain and steel rope to the platform
Drive Electric hydraulic power unit — motor, pump and oil tank on one base
Total height 4 m
Platform travel 3 m
Control Remote control handset
Limits Upper and lower limit switches
Safety Fall arrester on the carriage

Build

Platform size 800 × 800 mm
Guardrail 800 mm high, three sides
Load capacity 500 kg
Machine weight About 80 kg
Finish Black columns, red platform
Power supply Confirmed per destination on the quotation drawing
Installation Bolted to a wall — not a mobile unit
Dimension drawing of the small cargo lift marked 400 cm total height, 80 cm platform width, 80 cm platform depth and 80 cm guardrail height
Dimensions: 400 cm total height, 800 × 800 mm platform and an 800 mm guardrail. The platform can also be built 100 × 100 cm or 80 × 100 cm — the exact size is confirmed on the quotation drawing.
Built to order on this model Platform size, lift height and colour can all be changed. The 800 × 800 mm deck is standard; 100 × 100 cm and 80 × 100 cm are built on request. Send the floor-to-floor height and the opening you have, and we confirm the columns and the platform before production starts.

Manually measured dimensions may vary slightly; refer to the actual machine. Lift height, platform size and power supply for a specific build are confirmed on the quotation drawing.

Build detail

Two columns, one cylinder, a fenced deck

The cylinder does the lifting between the two columns, chain and rope carry the platform, the guardrail keeps the load on the deck, and the fall arrester catches the carriage if anything lets go.

Cargo lift marked with the fall arrester, limit switches, wire rope, cylinder, chain, guardrail and load plate
Columns

Two columns share the load

Structure

The platform runs between two steel columns rather than hanging off one. The load is split between them, so a pallet put down off centre does not twist the carriage or jam it in the guides.

Drive

Cylinder below, rope above

Lifting

The hydraulic cylinder pushes the carriage up between the columns, and chain and steel rope carry the platform on both sides to the pulley at the top. The rope takes the platform's weight; the cylinder provides the force.

Detail collage of the cage lift: the two roller limit switches on the column and the red cage with the wall-mounted control box behind it

Deck

800 × 800 mm, down to the floor

Platform

The deck comes down level with the floor so a pallet or a sack stack is slid on rather than lifted over an edge. It is sized to a standard pallet with a little room around it, and the plate takes a pallet truck nose.

Guardrail

800 mm fence, three sides open only at the front

Guard

The guardrail is 800 mm high and closes three sides, leaving the loading side clear. That height is enough to keep sacks and drums from sliding off as the platform starts and stops, without shutting the operator out of the loading face.

Where it is used

Warehouse, dock and basement — wherever the floor changes

A small lift for goods at the back of a building: it takes the floor space of a doorway, fixes to a wall, and moves what a person should not be carrying up a stair several times a shift.

  • Warehouse and stockroom levelsCartons, sacks and small pallets go between a ground-floor store and a mezzanine or first-floor racking, with the platform loaded at floor level at both ends.
  • Loading docks at a different heightWhere the dock is above or below the yard, the platform bridges the step so goods are lifted to the dock edge instead of being manhandled up a ramp.
  • Basement and cellar storesDeliveries at street level go down through a stairwell or hatch opening into a basement store, on a lift small enough to fit beside the stairs.
  • Workshops, kitchens and shopsBulk goods that arrive on a pallet and have to go up one floor: the lift does it, and the stair stays clear for people.
  • Warehouse
  • Loading dock
  • Basement
  • Mezzanine
  • Workshop
  • Retail back room
Built to order

Custom options on this cargo lift

The 500 kg build with an 800 × 800 mm platform and 3 m of lift is the standard machine. A bigger deck, a taller column or a different colour is built on the same frame.

Cargo lift with the fenced platform raised
Standard build shown: 500 kg, 800 × 800 mm platform, 800 mm guardrail, 4 m total height with 3 m of lift. Platform size, lift height and colour are built to order.
  • Platform size800 × 800 mm is standard. 100 × 100 cm and 80 × 100 cm are built on request — tell us the footprint of what you load and whether it has to be loaded from one side or two.
  • Lift height4 m total height with 3 m of travel is standard. A taller column is built for a higher floor — send the floor-to-floor height and the headroom above the opening.
  • FinishBlack columns with a red platform as standard; other colours are confirmed when you order, and your logo can be applied before the machine leaves the factory.
  • Loading edgeA roller deck or a ramp lip can be fitted to the loading side so goods roll on and off instead of being slid over the plate.
How a built-to-order unit is confirmed Send the floor-to-floor height, the opening size, the wall you intend to bolt the columns to and the heaviest load you handle. We confirm the column length, the platform, the brackets and the finish on a drawing before production starts.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — at about 80 kg this one ships as a single crate, which keeps the shipping cost down.

  1. You place the order online

    Your order is recorded and the machine is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What the freight quote includes Cost to your port or door, the shipping line and transit time, the earliest departure we can make, and the documents that travel with the goods. If we can cut your cost by combining this machine with others in one container, we will tell you before you pay.
Questions buyers ask

Frequently asked questions

How high does it lift?
4 m total height with 3 m of platform travel on the standard build. The extra metre is the columns above the top platform position plus the pulley, so the headroom above your upper opening has to take it. Send us the floor-to-floor height and we confirm the column length.
How much can it carry?
500 kg on the standard 800 × 800 mm platform, with a machine weight of about 80 kg. The columns are bolted to the wall, so the load goes into the building rather than into ballast on the platform. A heavier rating is built to order and written on the quotation drawing.
Can the platform be a different size?
Yes. 800 × 800 mm is standard, and 100 × 100 cm or 80 × 100 cm is built on request. Tell us the footprint of the largest thing you load — a pallet, a drum, a sheet stack — and we size the deck with a little room around it.
Where is the motor?
The hydraulic power unit sits beside the columns at floor level, with the cylinder working between them. Everything you check in service — oil level, gauge, valve block — is at the bottom of the installation rather than at the top of the run.
How is it installed?
The two columns are bolted to a wall, and the power unit stands on the floor beside them. The wall has to take the load, so the fixing detail matters more than the machine — send us photos of the wall and the opening and we confirm the brackets before dispatch. Installation is by a competent fitter on site.
How is it operated?
From a remote control handset, so the operator stands clear of the platform while it moves. The platform stops where you release the button, and limit switches stop it at the top and bottom of the travel.
Can people ride on it?
No. The guardrail is there to keep goods on the platform, not to carry a person: there is no gate interlock, no passenger control and no fall protection. It is a goods lift and should not be used to carry anyone.
What does it cost, and how is freight worked out?
The unit price depends on the build and the quantity; freight is a separate line priced by weight, volume and destination port, so the quote shows the machine cost and the shipping cost side by side. Send the height, the platform size, the load and the port you ship to.

For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.

Price on request500 kg · 800×800 · 3 m

Quote

Reviews

There are no reviews yet.

Be the first to review “Small Cargo Lift for Warehouse and Dock, 500 kg”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.