Professional Lifting Equipment Manufacturer

Guide Rail Cargo Lift 1000 kg, 3 m Lift

TMB-GR1000-403347427

Wall-mounted single-rail hydraulic cargo lift for moving goods between floors. One steel mast carries the platform on two guide channels and is bolted to a wall or structural column with four brackets; a hydraulic cylinder raises the platform on four chains, so the deck stays level as it climbs. The platform has a checkered anti-slip steel deck and a three-sided guard fence, and travel stops at the top on a roller limit switch.

Home/Mast Lift/Guide Rail Cargo Lift 1000 kg, 3 m Lift
In stock · ready to ship

Guide Rail Cargo Lift 1000 kg, 3 m LiftSKU: TMB-GR1000-403347427

A single steel rail carries 1000 kg through 3 m between two floors — bolted to the wall, driven by a hydraulic cylinder on four chains, and worked from a remote handset so nobody stands under the load.

Load capacity
1000 kg
Lift height
3 m
Installation
Wall-mounted rail
Machine weight
about 400 kg
Price on request
Standard build · 1000 kg and 3 m of lift — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard 1000 kg, 3 m build and dispatched from our own warehouse. A different lift height, platform size or finish is built to order — see custom options.
  • ✓
    Built to the specification published here — same single rail, four chains and hydraulic power unit on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

One rail on the wall, 1000 kg between floors

This is the lift you fit when a stair or a hoist will not take the weight and a full goods elevator will not fit. The rail bolts to the wall beside the opening, the platform runs up it, and the load goes from one floor to the next without anyone carrying it.

01

1000 kg on a single rail

The platform hangs off one steel post on two guide channels, so the lift needs one wall line rather than a shaft. A tonne of goods — a pallet of stock, a crate, a stack of panels — goes up square instead of one corner at a time.

02

Hydraulic cylinder on four chains

A hydraulic cylinder lifts the platform through four chains running over pulleys at the top of the rail. Four points, not one, so the deck stays level and a load sitting off centre does not cock the platform in the guides.

03

Bolted to the wall, not a wheeled cart

Four brackets hold the rail to a wall or a structural column and carry the load into the building instead of into the floor. That is why a 400 kg machine can raise 1000 kg without ballast or a counterweight.

04

Remote handset and a limit switch

The platform is worked from a remote control handset, so the operator stands clear of the load instead of under it. A roller limit switch at the top of the rail stops the platform before it reaches the pulley.

Specifications

Guide rail cargo lift: technical data

Figures are for the standard build. Send us the floor-to-floor height and the wall you intend to fix the rail to, and we confirm the rail length, the platform size and the fixing detail on a drawing before production.

Lifting & control

Lifting mechanism Single guide rail, hydraulic cylinder lifting the platform on four chains
Drive Electric hydraulic power unit — motor, pump and oil tank on one base
Lift height 3 m
Control Remote control handset
Upper limit Roller limit switch at the top of the rail
Power supply Confirmed per destination on the quotation drawing

Build

Mast One steel post, two guide channels, four wall-mounting brackets
Platform deck Checkered anti-slip steel plate
Guard Three-sided fence around the deck
Load capacity 1000 kg
Machine weight About 400 kg
Finish Steel, red or blue
Installation Fixed to a wall or structural column — not a mobile unit
Front view of the guide rail cargo lift showing the central hydraulic cylinder, four chains, wall brackets and the guard fence
Front view: the hydraulic cylinder sits between the two guide channels, the four chains run to the pulleys above, and the four wall brackets that carry the load into the building are visible down the mast. Platform size is confirmed on the quotation drawing.
Built to order on this model Lift height, platform size, finish and branding can all be changed. Send the floor-to-floor height and the opening you have, and we confirm the rail length, the platform and the fixing brackets before production starts.

Manually measured dimensions may vary slightly; refer to the actual machine. Lift height, platform size and power supply for a specific build are confirmed on the quotation drawing.

Build detail

What lifts the platform, and what holds it level

The same machine is shown here in both standard finishes, red and blue. The rail carries the load into the wall; the cylinder and the four chains do the lifting; the power unit sits on the floor beside it; the fence and the checkered deck keep the goods on the platform.

Detail collage of the mast: a roller limit switch on the rail and the hydraulic cylinder between two chain runs over the head pulleys

Cylinder

One cylinder in the middle of the rail

Lifting

The hydraulic cylinder stands between the two guide channels and pushes the platform carriage straight up. Because the push is vertical, the rail takes it in compression — a 400 kg machine raises 1000 kg without a counterweight.

Chains

Four chains over two pulleys

Levelling

Each side of the platform is carried by a pair of chains running over a pulley at the top of the rail. Four points hold the deck level, so a load sitting to one side does not jam the platform in the guides.

Checkered anti-slip steel deck inside a three-sided guard fence, with the guide channels and chains behind
Deck

Checkered plate, not a sheet of plywood

Platform

The deck is checkered anti-slip steel, welded into a frame with a lip on the loading edge — a pallet or a drum sits on it without sliding as the platform starts and stops. The plate also takes a forklift or pallet truck nosing in at floor level.

Fence

Three sides fenced, one side open

Guard

The fence closes the back and both ends and runs in horizontal rails, so the goods stay on the deck while the loading side stays clear. The open side is the one that meets the floor you are loading from.

Hydraulic power unit with a vertical motor, valve block, pressure gauge and blue oil tank
Power unit

Motor, pump and tank on one base

Drive

The hydraulic power unit stands on the floor beside the rail: a vertical motor over a valve block and a pressure gauge, sitting on the oil tank. It is a separate unit, so it can be placed where there is room and reached for service without climbing to the platform.

Servicing

The parts you touch are at floor level

Maintenance

Oil level, the pressure gauge and the valve block are all at the bottom of the installation, not at the top of the rail. Chains and the limit switch are the only parts that need checking at height, and both are reachable from the upper floor opening.

Where it is used

The openings where a stair is the only way up

A back-of-house lift for goods, not for passengers: it fits the wall line beside an existing opening, needs one power supply, and takes the weight that a stair, a ramp or a pair of hands will not.

  • Mezzanine and second-floor stockA pallet or a stack of cartons goes from the ground floor to the mezzanine deck in one lift, instead of being broken down and carried up a stair a box at a time.
  • Warehouse and workshop levelsBetween a production floor and a storage floor, or onto a loading dock at a different level — the platform takes the weight and the operator stays on the floor with the handset.
  • Basement and back-of-house deliveriesStock arriving at street level goes down to a basement store through a stairwell opening, without a ramp or a goods elevator the building does not have.
  • Shops, kitchens and small storeroomsWhere the volume is small but the weight is not — drums, crates, sacks and cases that one person should not be carrying up a flight of stairs every day.
  • Mezzanine
  • Warehouse
  • Workshop
  • Basement
  • Retail back room
  • Loading dock
Built to order

Custom options on this guide rail lift

The 1000 kg build with 3 m of travel is the standard machine. When the floor-to-floor height is different or the platform has to take something wider, the same rail and cylinder are built to your drawing.

Front view of the cargo lift with the hydraulic cylinder, chains and platform guard fence
Standard build shown: 1000 kg, 3 m lift, single rail with four wall brackets, three-sided fence and checkered deck. Lift height, platform size, finish and branding are built to order.
  • Lift height3 m is standard. A taller rail is built for a higher floor — send the floor-to-floor height and the headroom above the upper opening.
  • Platform sizeThe standard deck suits pallets and crates. A wider or longer platform is built for panels, drums or long goods, with the fence and the loading lip adjusted to match.
  • Finish and your logoRed or blue as standard. A specified colour and your logo can be applied before the machine leaves the factory.
  • Loading and unloadingA roller deck, a small ramp lip or a pallet-stop bar can be fitted to the loading edge so goods roll on and off instead of being lifted over the lip.
How a built-to-order unit is confirmed Send the floor-to-floor height, the opening size, the wall you intend to fix the rail to and the heaviest load you handle. We confirm the rail length, the platform, the brackets and the finish on a drawing before production starts.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this lift ships as one crate on a pallet, rail and platform bundled separately.

  1. You place the order online

    Your order is recorded and the machine is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What the freight quote includes Cost to your port or door, the shipping line and transit time, the earliest departure we can make, and the documents that travel with the goods. If we can cut your cost by combining this machine with others in one container, we will tell you before you pay.
Questions buyers ask

Frequently asked questions

How high does it lift?
3 m on the standard build, measured as platform travel. That is one storey in most commercial buildings. Check the floor-to-floor height and the headroom above the upper opening before you order: the rail stands taller than the travel, and the pulleys at the top need clearance above the highest platform position.
How much can it carry?
1000 kg on the standard build, with a machine weight of about 400 kg. Because the rail is bolted to the wall, the load goes into the building rather than into ballast on the platform — that is why a 400 kg machine lifts a tonne. A heavier rating is built to order and written on the quotation drawing.
How is it installed?
The rail is fixed to a wall or a structural column with four brackets, and the hydraulic power unit stands on the floor beside it. The wall has to take the load, so the fixing detail matters more than the machine itself — send us photos of the wall and the opening and we confirm the brackets before dispatch. Installation is by a competent fitter on site.
How is it operated?
From a remote control handset, so the operator can stand clear of the platform while it moves. Up and down are the only two movements; the platform stops where you release the button.
What stops it at the top?
A roller limit switch at the top of the rail cuts the lift before the platform reaches the pulleys. The platform also runs inside two guide channels, so it cannot swing out of the rail under an off-centre load.
What size is the platform?
The standard deck takes a pallet or a stack of crates. Platform size is confirmed on the quotation drawing with your lift height, because a taller rail and a wider deck are usually ordered together. Tell us the largest footprint you handle and we size it to that.
Can people ride on it?
No. This is a goods lift: the platform is fenced on three sides and has no gate interlock, no passenger controls and no fall protection for a person. It is built to move goods between floors, and it should not be used to carry anyone.
What does it cost, and how is freight worked out?
The unit price depends on the build and the quantity; freight is a separate line priced by weight, volume and destination port, so the quote shows the machine cost and the shipping cost side by side. Send the floor-to-floor height, the load and the port you ship to.

For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.

Price on request1000 kg · 3 m

Quote

Reviews

There are no reviews yet.

Be the first to review “Guide Rail Cargo Lift 1000 kg, 3 m Lift”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.