Guide Rail Electric Lift 500 kg, 3 m TravelSKU: TMB-GR500-403358963
500 kg on an 800 × 800 mm deck, 3 m of travel up a single wall-mounted rail — and an 80 kg machine, so two people can stand it up against the wall without a crane.
- ✓
Held in stock in the standard 500 kg, 800 × 800 mm build and dispatched from our own warehouse. A different lift height, platform size or colour is built to order — see custom options.
- ✓
Built to the specification published here — same single rail, four chains and hydraulic power unit on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
500 kg up the wall, on a machine two people can lift
The rail is the only part that has to be fixed, and the whole lift weighs 80 kg — so it goes into a building that was never designed around a goods elevator, and it goes in without a crane or a shaft.
800 × 800 mm deck, 500 kg
A square deck that takes a pallet, a crate or a stack of cartons without hanging over the edges. The load sits inside the guard barrier, so nothing walks off the platform as it starts to climb.
4 m total height, 3 m of travel
The rail stands 4 m and the platform travels 3 m — one storey in most commercial buildings, with the extra metre reserved for the carriage and the pulleys at the top. Measure the headroom above your upper opening before you order.
80 kg machine, no crane needed
An 80 kg lift is carried in by two people and stood against the wall, which is why it suits a building with no hoist and a fitter with no lifting gear. The rail is fixed with four brackets and the power unit stands on the floor.
Remote control and a limit switch
The platform runs from a handset, so the operator stands back from the load rather than underneath it. A roller limit switch at the top of the rail stops the platform before the carriage reaches the pulleys.
Guide rail electric lift: technical data
Figures are for the standard build. The 4 m total height includes the rail above the top platform position — send us your floor-to-floor height and the headroom above the opening, and we confirm the rail length on a drawing.
Lifting & control
| Lifting mechanism | Single guide rail, hydraulic cylinder lifting the platform on four chains |
| Drive | Electric hydraulic power unit — motor, pump and oil tank on one base |
| Total height | 4 m, rail included |
| Platform travel | 3 m |
| Control | Remote control handset |
| Upper limit | Roller limit switch at the top of the rail |
| Power supply | Confirmed per destination on the quotation drawing |
Build
| Platform size | 800 × 800 mm |
| Platform deck | Steel plate with an anti-slip surface |
| Guard | Three-sided barrier around the deck |
| Load capacity | 500 kg |
| Machine weight | About 80 kg |
| Finish | Blue as standard; other colours to order |
| Installation | Fixed to a wall or structural column — not a mobile unit |

Manually measured dimensions may vary slightly; refer to the actual machine. Lift height, platform size and power supply for a specific build are confirmed on the quotation drawing.
How a 500 kg platform climbs one rail
The cylinder pushes the carriage up the rail, the four chains keep the deck level, the power unit stands on the floor beside it, and the barrier keeps the load inside the platform.

One cylinder, straight up the middle
The cylinder stands between the two guide channels and pushes the carriage vertically. The rail takes the push in compression rather than in bending, which is what lets an 80 kg machine lift 500 kg without ballast.
Four chain runs, two per side
Each side of the platform hangs on a pair of chains running over pulleys at the top of the rail. Four points hold the deck level, so a load sitting to one corner does not jam the carriage in the guides.

800 × 800 mm, square
The square deck takes a standard pallet with the load inside the frame, and the plate has an anti-slip surface so a drum or a carton does not slide as the platform starts and stops.
Three sides guarded, one side open
The barrier closes the back and both ends in horizontal rails and stays open on the loading side, the one that meets the floor you load from. Goods are contained without blocking the way on and off.

Motor, pump and tank in one block
The hydraulic unit stands on the floor beside the rail: a vertical motor over a valve block and pressure gauge, on top of the oil tank. It is separate from the rail, so it sits wherever there is floor space and is reached without climbing.
Everything you check is at floor level
Oil level, the gauge and the valve block are all at the bottom of the installation. The chains and the limit switch are the only parts to check at height, and both are reachable from the upper opening.
Buildings with no shaft and no hoist
A goods lift for the floors a stair is the only way up: one wall to fix to, one power supply, and a machine light enough that getting it into the building is not a project on its own.
- Mezzanine and loft storageCartons, crates and small pallets go up to a mezzanine deck through the stairwell opening, instead of being carried up by hand one at a time.
- Warehouse and workshop levelsBetween a storage floor and a production floor, or onto a dock at a different level — 500 kg at a time, with the operator on the floor and clear of the load.
- Basement and back-of-house stockDeliveries at street level go down to a basement store through an existing opening, where a ramp would eat the floor space and an elevator would never be justified.
- Shops, kitchens and storeroomsDrums, sacks and cases that one person should not be carrying up a flight of stairs every shift, on a lift that fits the wall line beside the stairs.
Custom options on this guide rail lift
The 500 kg build with 3 m of travel and an 800 × 800 mm deck is the standard machine. When the opening or the load is a different shape, the same rail and cylinder are built to your drawing.

- Lift height4 m total height with 3 m of travel is standard. A taller rail is built for a higher floor — send the floor-to-floor height and the headroom above the opening.
- Platform size800 × 800 mm is standard. A wider or longer deck is built for panels, drums or long cartons, with the barrier adjusted to the loading side.
- Finish and your logoBlue as standard; other colours are confirmed when you order. Your logo can be applied before the machine leaves the factory.
- Loading edgeA small ramp lip, a roller deck or a stop bar can be fitted to the loading edge so goods roll on and off or stop short of the far side.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — at 80 kg this one usually goes as a single crate, which keeps the shipping cost low.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it lift?
How much can it carry?
What size is the platform?
How is it installed?
How is it operated?
What stops it at the top?
Can people ride on it?
What does it cost, and how is freight worked out?
For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.








Reviews
There are no reviews yet.