Small Cargo Lift for Warehouse and Dock, 500 kgSKU: TMB-SC500-403883249
A fenced 800 × 800 mm platform on two columns, 500 kg between a warehouse floor and the level above — 4 m total height, 3 m of lift, and an 80 kg machine that goes up the wall without a shaft.
- ✓
Held in stock in the standard 500 kg, 800 × 800 mm build and dispatched from our own warehouse. A 100 × 100 cm or 80 × 100 cm platform, a different height or a different colour is built to order — see custom options.
- ✓
Built to the specification published here — same two columns, cylinder and fenced platform on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
A fenced platform where a forklift cannot reach
For the store, the dock and the basement where goods have to change level and there is no ramp, no shaft and no room for a forklift — a small platform on the wall, loaded at floor level and raised to the floor above.
800 × 800 mm platform, 500 kg
A square deck that takes a pallet or a stack of sacks with the load inside the guardrail. The platform comes down level with the floor, so goods are slid on instead of lifted over a lip.
800 mm guardrail on three sides
The fence stands 800 mm high around three sides and stays open on the loading side. Sacks, drums and cartons stay on the deck as the platform rises, and the open side is where the goods come on.
Cylinder, chain and steel rope
A hydraulic cylinder between the two columns lifts the carriage, and chain and steel rope carry the platform on both sides. Two columns mean the load is shared and the platform stays level even when it is loaded to one corner.
4 m total height, 3 m of lift
The columns stand 4 m and the platform travels 3 m — one storey, with the extra height taken by the carriage and the pulley at the top. Check the headroom above the upper floor before you order.
Small cargo lift: technical data
Figures are for the standard build. The drawing below shows the 4 m total height, the 800 × 800 mm platform and the 800 mm guardrail — send us your floor-to-floor height and we confirm the column length against your building.
Lifting & control
| Lifting mechanism | Hydraulic cylinder between two columns, chain and steel rope to the platform |
| Drive | Electric hydraulic power unit — motor, pump and oil tank on one base |
| Total height | 4 m |
| Platform travel | 3 m |
| Control | Remote control handset |
| Limits | Upper and lower limit switches |
| Safety | Fall arrester on the carriage |
Build
| Platform size | 800 × 800 mm |
| Guardrail | 800 mm high, three sides |
| Load capacity | 500 kg |
| Machine weight | About 80 kg |
| Finish | Black columns, red platform |
| Power supply | Confirmed per destination on the quotation drawing |
| Installation | Bolted to a wall — not a mobile unit |

Manually measured dimensions may vary slightly; refer to the actual machine. Lift height, platform size and power supply for a specific build are confirmed on the quotation drawing.
Two columns, one cylinder, a fenced deck
The cylinder does the lifting between the two columns, chain and rope carry the platform, the guardrail keeps the load on the deck, and the fall arrester catches the carriage if anything lets go.

Two columns share the load
The platform runs between two steel columns rather than hanging off one. The load is split between them, so a pallet put down off centre does not twist the carriage or jam it in the guides.
Cylinder below, rope above
The hydraulic cylinder pushes the carriage up between the columns, and chain and steel rope carry the platform on both sides to the pulley at the top. The rope takes the platform's weight; the cylinder provides the force.
800 × 800 mm, down to the floor
The deck comes down level with the floor so a pallet or a sack stack is slid on rather than lifted over an edge. It is sized to a standard pallet with a little room around it, and the plate takes a pallet truck nose.
800 mm fence, three sides open only at the front
The guardrail is 800 mm high and closes three sides, leaving the loading side clear. That height is enough to keep sacks and drums from sliding off as the platform starts and stops, without shutting the operator out of the loading face.
Warehouse, dock and basement — wherever the floor changes
A small lift for goods at the back of a building: it takes the floor space of a doorway, fixes to a wall, and moves what a person should not be carrying up a stair several times a shift.
- Warehouse and stockroom levelsCartons, sacks and small pallets go between a ground-floor store and a mezzanine or first-floor racking, with the platform loaded at floor level at both ends.
- Loading docks at a different heightWhere the dock is above or below the yard, the platform bridges the step so goods are lifted to the dock edge instead of being manhandled up a ramp.
- Basement and cellar storesDeliveries at street level go down through a stairwell or hatch opening into a basement store, on a lift small enough to fit beside the stairs.
- Workshops, kitchens and shopsBulk goods that arrive on a pallet and have to go up one floor: the lift does it, and the stair stays clear for people.
Custom options on this cargo lift
The 500 kg build with an 800 × 800 mm platform and 3 m of lift is the standard machine. A bigger deck, a taller column or a different colour is built on the same frame.

- Platform size800 × 800 mm is standard. 100 × 100 cm and 80 × 100 cm are built on request — tell us the footprint of what you load and whether it has to be loaded from one side or two.
- Lift height4 m total height with 3 m of travel is standard. A taller column is built for a higher floor — send the floor-to-floor height and the headroom above the opening.
- FinishBlack columns with a red platform as standard; other colours are confirmed when you order, and your logo can be applied before the machine leaves the factory.
- Loading edgeA roller deck or a ramp lip can be fitted to the loading side so goods roll on and off instead of being slid over the plate.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — at about 80 kg this one ships as a single crate, which keeps the shipping cost down.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it lift?
How much can it carry?
Can the platform be a different size?
Where is the motor?
How is it installed?
How is it operated?
Can people ride on it?
What does it cost, and how is freight worked out?
For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.










Reviews
There are no reviews yet.