Professional Lifting Equipment Manufacturer

Guide Rail Electric Lift 500 kg, 3 m Travel

TMB-GR500-403358963

Electric guide rail lift for moving goods between floors. One steel rail is bolted to a wall or column with four brackets and carries an 800 × 800 mm platform on two guide channels; a hydraulic cylinder raises the platform on four chains, so the deck stays level as it climbs. Total height 4 m, platform travel 3 m, load capacity 500 kg, machine weight 80 kg, operated from a remote control handset.

Home/Mast Lift/Guide Rail Electric Lift 500 kg, 3 m Travel
In stock · ready to ship

Guide Rail Electric Lift 500 kg, 3 m TravelSKU: TMB-GR500-403358963

500 kg on an 800 × 800 mm deck, 3 m of travel up a single wall-mounted rail — and an 80 kg machine, so two people can stand it up against the wall without a crane.

Load capacity
500 kg
Platform
800 × 800 mm
Travel
3 m of 4 m total height
Machine weight
80 kg
Price on request
Standard build · 500 kg and 3 m of travel — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard 500 kg, 800 × 800 mm build and dispatched from our own warehouse. A different lift height, platform size or colour is built to order — see custom options.
  • ✓
    Built to the specification published here — same single rail, four chains and hydraulic power unit on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

500 kg up the wall, on a machine two people can lift

The rail is the only part that has to be fixed, and the whole lift weighs 80 kg — so it goes into a building that was never designed around a goods elevator, and it goes in without a crane or a shaft.

01

800 × 800 mm deck, 500 kg

A square deck that takes a pallet, a crate or a stack of cartons without hanging over the edges. The load sits inside the guard barrier, so nothing walks off the platform as it starts to climb.

02

4 m total height, 3 m of travel

The rail stands 4 m and the platform travels 3 m — one storey in most commercial buildings, with the extra metre reserved for the carriage and the pulleys at the top. Measure the headroom above your upper opening before you order.

03

80 kg machine, no crane needed

An 80 kg lift is carried in by two people and stood against the wall, which is why it suits a building with no hoist and a fitter with no lifting gear. The rail is fixed with four brackets and the power unit stands on the floor.

04

Remote control and a limit switch

The platform runs from a handset, so the operator stands back from the load rather than underneath it. A roller limit switch at the top of the rail stops the platform before the carriage reaches the pulleys.

Specifications

Guide rail electric lift: technical data

Figures are for the standard build. The 4 m total height includes the rail above the top platform position — send us your floor-to-floor height and the headroom above the opening, and we confirm the rail length on a drawing.

Lifting & control

Lifting mechanism Single guide rail, hydraulic cylinder lifting the platform on four chains
Drive Electric hydraulic power unit — motor, pump and oil tank on one base
Total height 4 m, rail included
Platform travel 3 m
Control Remote control handset
Upper limit Roller limit switch at the top of the rail
Power supply Confirmed per destination on the quotation drawing

Build

Platform size 800 × 800 mm
Platform deck Steel plate with an anti-slip surface
Guard Three-sided barrier around the deck
Load capacity 500 kg
Machine weight About 80 kg
Finish Blue as standard; other colours to order
Installation Fixed to a wall or structural column — not a mobile unit
Guide rail electric lift with the remote control, thicker chain, hydraulic cylinder, protective barrier and anti-slip platform marked
Call-outs: the lifting remote control at the top of the rail and the control box on the side, the thicker chain run, the hydraulic cylinder between the guide channels, the guard barrier and the anti-slip deck.
Built to order on this model Lift height, platform size and colour can all be changed. Send the floor-to-floor height and the opening you have, and we confirm the rail length, the platform and the fixing brackets before production starts.

Manually measured dimensions may vary slightly; refer to the actual machine. Lift height, platform size and power supply for a specific build are confirmed on the quotation drawing.

Build detail

How a 500 kg platform climbs one rail

The cylinder pushes the carriage up the rail, the four chains keep the deck level, the power unit stands on the floor beside it, and the barrier keeps the load inside the platform.

Hydraulic cylinder between the two guide channels with four chains running up the mast
Cylinder

One cylinder, straight up the middle

Lifting

The cylinder stands between the two guide channels and pushes the carriage vertically. The rail takes the push in compression rather than in bending, which is what lets an 80 kg machine lift 500 kg without ballast.

Chains

Four chain runs, two per side

Levelling

Each side of the platform hangs on a pair of chains running over pulleys at the top of the rail. Four points hold the deck level, so a load sitting to one corner does not jam the carriage in the guides.

800 by 800 mm platform inside a three-sided guard barrier with the chains and cylinder behind
Deck

800 × 800 mm, square

Platform

The square deck takes a standard pallet with the load inside the frame, and the plate has an anti-slip surface so a drum or a carton does not slide as the platform starts and stops.

Barrier

Three sides guarded, one side open

Guard

The barrier closes the back and both ends in horizontal rails and stays open on the loading side, the one that meets the floor you load from. Goods are contained without blocking the way on and off.

Hydraulic power unit with a vertical motor, valve block, pressure gauge and blue oil tank
Power unit

Motor, pump and tank in one block

Drive

The hydraulic unit stands on the floor beside the rail: a vertical motor over a valve block and pressure gauge, on top of the oil tank. It is separate from the rail, so it sits wherever there is floor space and is reached without climbing.

Servicing

Everything you check is at floor level

Maintenance

Oil level, the gauge and the valve block are all at the bottom of the installation. The chains and the limit switch are the only parts to check at height, and both are reachable from the upper opening.

Where it is used

Buildings with no shaft and no hoist

A goods lift for the floors a stair is the only way up: one wall to fix to, one power supply, and a machine light enough that getting it into the building is not a project on its own.

  • Mezzanine and loft storageCartons, crates and small pallets go up to a mezzanine deck through the stairwell opening, instead of being carried up by hand one at a time.
  • Warehouse and workshop levelsBetween a storage floor and a production floor, or onto a dock at a different level — 500 kg at a time, with the operator on the floor and clear of the load.
  • Basement and back-of-house stockDeliveries at street level go down to a basement store through an existing opening, where a ramp would eat the floor space and an elevator would never be justified.
  • Shops, kitchens and storeroomsDrums, sacks and cases that one person should not be carrying up a flight of stairs every shift, on a lift that fits the wall line beside the stairs.
  • Mezzanine
  • Loft
  • Warehouse
  • Basement
  • Retail back room
  • Workshop
Built to order

Custom options on this guide rail lift

The 500 kg build with 3 m of travel and an 800 × 800 mm deck is the standard machine. When the opening or the load is a different shape, the same rail and cylinder are built to your drawing.

Guide rail electric lift with the platform raised part way up the rail
Standard build shown: 500 kg, 800 × 800 mm deck, 4 m total height with 3 m of travel, three-sided barrier and anti-slip deck. Lift height, platform size and colour are built to order.
  • Lift height4 m total height with 3 m of travel is standard. A taller rail is built for a higher floor — send the floor-to-floor height and the headroom above the opening.
  • Platform size800 × 800 mm is standard. A wider or longer deck is built for panels, drums or long cartons, with the barrier adjusted to the loading side.
  • Finish and your logoBlue as standard; other colours are confirmed when you order. Your logo can be applied before the machine leaves the factory.
  • Loading edgeA small ramp lip, a roller deck or a stop bar can be fitted to the loading edge so goods roll on and off or stop short of the far side.
How a built-to-order unit is confirmed Send the floor-to-floor height, the opening size, the wall you intend to fix the rail to and the heaviest load you handle. We confirm the rail length, the platform, the brackets and the finish on a drawing before production starts.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — at 80 kg this one usually goes as a single crate, which keeps the shipping cost low.

  1. You place the order online

    Your order is recorded and the machine is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What the freight quote includes Cost to your port or door, the shipping line and transit time, the earliest departure we can make, and the documents that travel with the goods. If we can cut your cost by combining this machine with others in one container, we will tell you before you pay.
Questions buyers ask

Frequently asked questions

How high does it lift?
4 m total height with 3 m of platform travel on the standard build. The extra metre is the rail and the pulleys above the top platform position, so the headroom above your upper opening has to take it. Send us the floor-to-floor height and we confirm the rail length against your building.
How much can it carry?
500 kg on the standard build, on an 800 × 800 mm deck, with a machine weight of about 80 kg. The rail is bolted to the wall, so the load goes into the building rather than into ballast on the platform. A heavier rating is built to order and written on the quotation drawing.
What size is the platform?
800 × 800 mm, a square deck that takes a standard pallet with the load inside the guard barrier. A wider or longer platform is built to order — tell us the largest footprint you handle and whether it has to be loaded from one side or two.
How is it installed?
The rail is fixed to a wall or a structural column with four brackets, and the hydraulic unit stands on the floor beside it. At 80 kg the lift itself is handled by two people; what matters is the wall, so send us photos of the wall and the opening and we confirm the fixing detail before dispatch. Installation is by a competent fitter on site.
How is it operated?
From a remote control handset, so the operator can stand back from the platform while it moves. Up and down are the only two movements, and the platform stops where you release the button.
What stops it at the top?
A roller limit switch at the top of the rail cuts the lift before the carriage reaches the pulleys. The platform also runs inside two guide channels, so it cannot swing out of the rail under an off-centre load.
Can people ride on it?
No. It is a goods lift: the platform has a three-sided barrier but no gate interlock, no passenger controls and no fall protection for a person. It moves goods between floors and should not carry anyone.
What does it cost, and how is freight worked out?
The unit price depends on the build and the quantity; freight is a separate line priced by weight, volume and destination port. At about 80 kg the machine packs small, so shipping is usually a modest share of the total — send the height, the load and the port you ship to and we quote both.

For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.

Price on request500 kg · 800×800 · 3 m

Quote

Reviews

There are no reviews yet.

Be the first to review “Guide Rail Electric Lift 500 kg, 3 m Travel”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.