Wall-Mounted Hydraulic Cargo Lift, 1000 kgSKU: TMB-WH1000-523988764
A caged platform that bolts to a wall: 1000 kg on a 1000 × 800 mm non-slip deck, lifting 2 to 5 m, with the hydraulic station standing on the floor beside the mast.
- ✓
Held in stock in the standard builds and dispatched from our own warehouse. Another height, a wider platform or a different colour is built to order — see custom options.
- ✓
Built to the specification published here — same mast, cylinder, chain and platform on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
A lift that needs a wall, not a shaft
For buildings where goods have to change floor and there is no shaft to build: the mast is fixed to the wall beside the opening, the cage comes down to the floor, and the hydraulic station stands at the bottom out of the way.
A tonne on a non-slip deck
The platform is 1000 × 800 mm of 1.8 mm non-slip steel plate, rated up to 1000 kg. A pallet, a stack of cartons or a drum goes on and stays on, and the plate takes the nose of a pallet truck at floor level.
Four heights off one design
The same mast and cage are built for 2, 3, 4 or 5 m of lift, with an overall height of 3, 4, 5 or 6 m. Pick the lift you need, not the machine — the headroom above the upper landing is the only thing that changes.
Cylinder and chain, 3 kW station
A 63-type hydraulic cylinder pushes a crosshead up between the two rails and 5-link chain carries the cage. The 3 kW hydraulic station stands on the floor beside the mast, connected by hose, so the oil tank and the motor are at the bottom for servicing.
Double limit switches
Two limit switches are fitted for the up and down direction, so the cage stops at the top and bottom of the run in both directions. The response is direct — the switch cuts the drive rather than relying on the operator to let go in time.
Wall-mounted cargo lift: technical data
Four standard sizes, built on the same mast and cage. Pick by the lifting height you need; the overall height is always one metre more, because the mast has to stand above the upper landing.
| Model | Lifting height | Overall height | Capacity | Platform |
|---|---|---|---|---|
| S | 2 m | 3 m | 1000 kg | 1000 × 800 mm |
| M | 3 m | 4 m | 1000 kg | 1000 × 800 mm |
| L | 4 m | 5 m | 1000 kg | 1000 × 800 mm |
| XL | 5 m | 6 m | 1000 kg | 1000 × 800 mm |
Lifting & power
| Lifting mechanism | 63-type hydraulic cylinder with 5-link chain to the cage |
| Hydraulic station | 3 kW, low-speed motor on an oil tank, standing beside the mast |
| Limit switches | Double, one for each direction |
| Load capacity | Up to 1000 kg |
| Lifting height | 2 / 3 / 4 / 5 m |
| Overall height | 3 / 4 / 5 / 6 m |
Deck & finish
| Platform | 1000 × 800 mm, 1.8 mm non-slip steel plate |
| Cage footprint | About 1000 × 1000 mm including the guardrail frame |
| Guardrail | 800 mm high, framed around the platform |
| Mast | Two rails, 700 mm apart |
| Colours | Yellow, red or blue as standard |
| Installation | Fixed to a wall beside the opening — no shaft, no pit |
| Power supply | Confirmed per destination on the quotation drawing |

Manually measured dimensions may vary slightly; refer to the actual machine. Height, platform size, colour and power supply for a specific build are confirmed on the quotation drawing.
Cylinder in the middle, chain on both sides
The cylinder does the pushing, chain carries the cage, the two rails keep it square, and the hydraulic station stays on the floor where it can be reached.

Cylinder up the middle, chain each side
The 63-type cylinder stands between the two rails and pushes a crosshead up. Chain runs from the crosshead down to the cage on both sides, so the platform is pulled at two points and stays level even when the load sits to one side.
5-link chain, built for site conditions
The chain is the 5-link type, which has some corrosion resistance and suits the damp, dusty and outdoor positions these lifts are often fixed in. It runs in the open where it can be seen and greased, not inside a sealed box.

Down to the floor, fenced on the sides
The cage comes down level with the floor, so goods are slid on from a pallet truck instead of being lifted over a lip. The 800 mm guardrail frames the deck and keeps cartons and drums on it as the cage starts and stops.
Buttons on the wall, pump on the floor
The control panel is fixed to the wall beside the opening and the hydraulic station stands at the foot of the mast. Nothing heavy or electrical travels with the cage, and everything that needs checking — oil level, motor, valves — is on the floor.
Stockrooms, workshops and outside walls
Anywhere a floor level changes and a ramp, a stair or a forklift will not do the job: the lift takes the footprint of a doorway and fixes to the wall that is already there.
- Stockrooms and mezzaninesCartons and pallets go from the ground-floor racking to a mezzanine, with the cage loaded at floor level at both ends and the mast fixed to the wall between them.
- Outside walls and yardsThe lift is fixed to an external wall and lands at a balcony or a first-floor door, so goods come up from the yard without being carried through the building.
- Workshops and plant roomsHeavy parts, drums and toolboxes go up to a service floor on a deck that takes a tonne, without blocking the stair for the rest of the shift.
- Basement and cellar storesDeliveries at street level go down through a hatch or stairwell opening into a basement store, on a cage that fits beside the stairs.
Custom options on this cargo lift
Four heights and three colours are standard. Anything beyond that is built on the same mast and cage.

- Lifting height2, 3, 4 and 5 m of lift are standard, with overall heights of 3, 4, 5 and 6 m. A taller mast is built for a specific job — send the floor-to-floor height and the headroom above the upper landing.
- Platform1000 × 800 mm is standard. A wider or deeper deck is built on the same cage frame, and the guardrail layout can be changed to suit the side you load from.
- ColourYellow, red and blue are standard. Any other colour is matched when you order, and your logo can be applied before the machine leaves the factory.
- FixingThe mast is fixed to the wall beside the opening, with brackets sized to the wall you have. Send photos of the wall and the opening and we confirm the brackets on the drawing.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — the mast packs down to a long crate, which keeps the cost down.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
Which height do I need?
How much does it carry?
Does it need a shaft or a pit?
Where does the hydraulic station go?
How is it stopped at the top and bottom?
What colours are available?
Can people ride on the platform?
What does it cost, and how is freight worked out?
For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.









Reviews
There are no reviews yet.