Professional Lifting Equipment Manufacturer

Wall-Mounted Hydraulic Cargo Lift, 1000 kg

TMB-WH1000-523988764

Wall-mounted hydraulic cargo lift for goods between floor levels. Load capacity up to 1000 kg, lifting height 2 m, 3 m, 4 m or 5 m with an overall height of 3 m, 4 m, 5 m or 6 m. Platform 1000 × 800 mm of 1.8 mm non-slip steel plate, inside an 800 mm guardrail, cage footprint about 1000 × 1000 mm, mast width 700 mm.

Home/Mast Lift/Wall-Mounted Hydraulic Cargo Lift, 1000 kg
In stock · ready to ship

Wall-Mounted Hydraulic Cargo Lift, 1000 kgSKU: TMB-WH1000-523988764

A caged platform that bolts to a wall: 1000 kg on a 1000 × 800 mm non-slip deck, lifting 2 to 5 m, with the hydraulic station standing on the floor beside the mast.

Load capacity
Up to 1000 kg
Lifting height
2 / 3 / 4 / 5 m
Platform
1000 × 800 mm
Guardrail
800 mm high
Price on request
Standard build · 1000 kg, platform 1000 × 800 mm — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard builds and dispatched from our own warehouse. Another height, a wider platform or a different colour is built to order — see custom options.
  • ✓
    Built to the specification published here — same mast, cylinder, chain and platform on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

A lift that needs a wall, not a shaft

For buildings where goods have to change floor and there is no shaft to build: the mast is fixed to the wall beside the opening, the cage comes down to the floor, and the hydraulic station stands at the bottom out of the way.

01

A tonne on a non-slip deck

The platform is 1000 × 800 mm of 1.8 mm non-slip steel plate, rated up to 1000 kg. A pallet, a stack of cartons or a drum goes on and stays on, and the plate takes the nose of a pallet truck at floor level.

02

Four heights off one design

The same mast and cage are built for 2, 3, 4 or 5 m of lift, with an overall height of 3, 4, 5 or 6 m. Pick the lift you need, not the machine — the headroom above the upper landing is the only thing that changes.

03

Cylinder and chain, 3 kW station

A 63-type hydraulic cylinder pushes a crosshead up between the two rails and 5-link chain carries the cage. The 3 kW hydraulic station stands on the floor beside the mast, connected by hose, so the oil tank and the motor are at the bottom for servicing.

04

Double limit switches

Two limit switches are fitted for the up and down direction, so the cage stops at the top and bottom of the run in both directions. The response is direct — the switch cuts the drive rather than relying on the operator to let go in time.

Specifications

Wall-mounted cargo lift: technical data

Four standard sizes, built on the same mast and cage. Pick by the lifting height you need; the overall height is always one metre more, because the mast has to stand above the upper landing.

Model Lifting height Overall height Capacity Platform
S 2 m 3 m 1000 kg 1000 × 800 mm
M 3 m 4 m 1000 kg 1000 × 800 mm
L 4 m 5 m 1000 kg 1000 × 800 mm
XL 5 m 6 m 1000 kg 1000 × 800 mm

Lifting & power

Lifting mechanism 63-type hydraulic cylinder with 5-link chain to the cage
Hydraulic station 3 kW, low-speed motor on an oil tank, standing beside the mast
Limit switches Double, one for each direction
Load capacity Up to 1000 kg
Lifting height 2 / 3 / 4 / 5 m
Overall height 3 / 4 / 5 / 6 m

Deck & finish

Platform 1000 × 800 mm, 1.8 mm non-slip steel plate
Cage footprint About 1000 × 1000 mm including the guardrail frame
Guardrail 800 mm high, framed around the platform
Mast Two rails, 700 mm apart
Colours Yellow, red or blue as standard
Installation Fixed to a wall beside the opening — no shaft, no pit
Power supply Confirmed per destination on the quotation drawing
Specification drawing of the wall-mounted cargo lift for the 2 m lift, marked 700 mm mast width, 760 mm carriage, 800 mm guardrail, 1000 × 1000 mm cage and 3000 mm overall height
Size S on the sheet: 3000 mm overall for 2000 mm of lift, 700 mm between the mast rails, an 800 mm guardrail and a cage about 1000 × 1000 mm. The M, L and XL builds are the same machine with a taller mast — 4, 5 and 6 m overall for 3, 4 and 5 m of lift.
Built to order on this model Height is the usual change, and it is a standard option in four sizes. A wider platform, a taller mast than 5 m of lift, a different guardrail layout or a colour other than yellow, red and blue is built to order — send the floor-to-floor height, the opening and what you load.

Manually measured dimensions may vary slightly; refer to the actual machine. Height, platform size, colour and power supply for a specific build are confirmed on the quotation drawing.

Build detail

Cylinder in the middle, chain on both sides

The cylinder does the pushing, chain carries the cage, the two rails keep it square, and the hydraulic station stays on the floor where it can be reached.

Hydraulic cylinder between the two mast rails with chain runs on both sides and the crosshead above
Lifting

Cylinder up the middle, chain each side

Drive

The 63-type cylinder stands between the two rails and pushes a crosshead up. Chain runs from the crosshead down to the cage on both sides, so the platform is pulled at two points and stays level even when the load sits to one side.

Chain

5-link chain, built for site conditions

Chain

The chain is the 5-link type, which has some corrosion resistance and suits the damp, dusty and outdoor positions these lifts are often fixed in. It runs in the open where it can be seen and greased, not inside a sealed box.

Cargo lift cage at floor level against a wall inside a stockroom, next to pallet racking, with a wall-mounted control panel
Deck

Down to the floor, fenced on the sides

Platform

The cage comes down level with the floor, so goods are slid on from a pallet truck instead of being lifted over a lip. The 800 mm guardrail frames the deck and keeps cartons and drums on it as the cage starts and stops.

Control

Buttons on the wall, pump on the floor

Control

The control panel is fixed to the wall beside the opening and the hydraulic station stands at the foot of the mast. Nothing heavy or electrical travels with the cage, and everything that needs checking — oil level, motor, valves — is on the floor.

Where it is used

Stockrooms, workshops and outside walls

Anywhere a floor level changes and a ramp, a stair or a forklift will not do the job: the lift takes the footprint of a doorway and fixes to the wall that is already there.

  • Stockrooms and mezzaninesCartons and pallets go from the ground-floor racking to a mezzanine, with the cage loaded at floor level at both ends and the mast fixed to the wall between them.
  • Outside walls and yardsThe lift is fixed to an external wall and lands at a balcony or a first-floor door, so goods come up from the yard without being carried through the building.
  • Workshops and plant roomsHeavy parts, drums and toolboxes go up to a service floor on a deck that takes a tonne, without blocking the stair for the rest of the shift.
  • Basement and cellar storesDeliveries at street level go down through a hatch or stairwell opening into a basement store, on a cage that fits beside the stairs.
  • Stockroom
  • Mezzanine
  • Outside wall
  • Workshop
  • Basement
  • Warehouse
Built to order

Custom options on this cargo lift

Four heights and three colours are standard. Anything beyond that is built on the same mast and cage.

Yellow wall-mounted cargo lift fitted to an outside wall
Installed outdoors: the mast fixed to the wall, the cage landing at the balcony level and the hydraulic station at the bottom. Height, platform size and colour are built to order.
  • Lifting height2, 3, 4 and 5 m of lift are standard, with overall heights of 3, 4, 5 and 6 m. A taller mast is built for a specific job — send the floor-to-floor height and the headroom above the upper landing.
  • Platform1000 × 800 mm is standard. A wider or deeper deck is built on the same cage frame, and the guardrail layout can be changed to suit the side you load from.
  • ColourYellow, red and blue are standard. Any other colour is matched when you order, and your logo can be applied before the machine leaves the factory.
  • FixingThe mast is fixed to the wall beside the opening, with brackets sized to the wall you have. Send photos of the wall and the opening and we confirm the brackets on the drawing.
How a built-to-order unit is confirmed Send the floor-to-floor height, the opening size, the wall you intend to fix the mast to, what you load and the site voltage. We confirm the height, platform, brackets and motor on a drawing before production starts.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — the mast packs down to a long crate, which keeps the cost down.

  1. You place the order online

    Your order is recorded and the machine is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What arrives in the crate Mast, cage, cylinder, chain, hydraulic station and control panel, packed with the drawing we agreed. Hydraulic oil is not included: the station is filled and the lift commissioned on site by the fitter who installs it.
Questions buyers ask

Frequently asked questions

Which height do I need?
Match the lifting height to the floor-to-floor distance, not to the overall height. 2, 3, 4 and 5 m of lift are standard, and the mast always stands one metre above the lifting height — so 3, 4, 5 and 6 m overall. Check the headroom above the upper landing before you order.
How much does it carry?
Up to 1000 kg on the standard platform, in every height. The platform is 1000 × 800 mm of 1.8 mm non-slip steel plate, which takes a pallet, a stack of cartons or a drum. A heavier rating is built to order and stated on the drawing.
Does it need a shaft or a pit?
Neither. The two rails are fixed to the wall beside the opening and the cage comes down to floor level, so there is nothing to dig and nothing to build around it. The wall has to carry the load, so the fixing detail matters more than the machine — send photos and we confirm the brackets.
Where does the hydraulic station go?
On the floor at the foot of the mast, connected by hose — it is a 3 kW station with its own oil tank. Nothing heavy sits up at the top of the mast, and the oil level, motor and valve block are all reachable at the bottom.
How is it stopped at the top and bottom?
Two limit switches, one for each direction, cut the drive when the cage reaches the end of the run. They work in both directions, so the cage stops whether it is going up or coming down.
What colours are available?
Yellow, red and blue as standard. Any other colour is matched to your order, and the lift can be finished with your logo before it leaves the factory.
Can people ride on the platform?
No. The guardrail keeps goods on the deck: there is no gate, no interlock and no passenger control. It is a goods lift — use a proper access platform for anyone who has to work at height.
What does it cost, and how is freight worked out?
The unit price depends on the height, the platform and the quantity; freight is a separate line priced by weight, volume and destination port, so the quote shows the machine cost and the shipping cost side by side. Send the lifting height, the platform size and the port you ship to.

For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.

Price on request1000 kg · 2–5 m lift · 1000×800

Quote

Reviews

There are no reviews yet.

Be the first to review “Wall-Mounted Hydraulic Cargo Lift, 1000 kg”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.