Yellow Two-Stage Manual Lift Table CartSKU: TMB-TS150-405048278
Two scissor stages on one 700 × 450 mm deck, pumped by hand to 1260 mm — bench height plus a shelf. No battery, no charger, nothing to plug in.
- ✓
Held in stock in the standard 700 × 450 mm yellow build and dispatched from our own warehouse. A different deck size, deck surface, colour or logo is built to order — see custom options.
- ✓
Built to the specification published here — same two-stage scissor, manual pump and red PU casters on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
1260 mm of lift — a bench plus a shelf — from a hand pump
One scissor stage gets you to bench height; the second one takes the same deck up to 1260 mm. That is the height of a mezzanine rail or the top shelf of a rack, reached without a ladder.
Two stacked scissor stages
Each stage is an X-shaped leg set on a common centre pin. Stacking two gives 1260 mm of height from a cart that still fits through a standard doorway when the deck is down.
700 × 450 mm deck, 35 mm thick
A steel deck banded at 35 mm, big enough for a crate, a generator or a stack of cartons, and narrow enough to push down a bench aisle.
150 kg on a hand pump
The pump handle sits at the frame; short strokes raise the deck a little at a time, so you can stop it at the shelf you are working at. Nothing to charge between jobs.
Chrome handle, release lever on the grip
The push handle is chrome tube at 810 mm with the lowering lever right beside the grip. You control the descent with your hand instead of bending to a valve.
Four red PU casters
Polyurethane wheels roll quietly on concrete and epoxy and do not mark a showroom floor. The front pair swivels, and each brake locks both the wheel and the swivel.
Folds flat for storage
The handle folds down onto the frame, so the cart parks under a bench or travels on a pallet without a tall crate around it.
Yellow two-stage lift table cart: technical data
Figures come from the factory drawing for the standard build. Ask us for a drawing with the raised height marked if you need to check the cart against a specific shelf or bench.
Lifting
| Lifting mechanism | Two-stage scissor, manual hydraulic pump |
| Max deck height | 1260 mm |
| Deck thickness | 35 mm |
| Lowering | Release lever at the handlebar |
| Rated load | 150 kg |
Build
| Deck size | 700 × 450 mm |
| Frame | Welded steel, powder coated yellow |
| Handle | Chrome tube, 810 mm, folds to the frame |
| Wheels | 4 red PU casters, front pair swivel, brakes |
| Scissor | Black steel, two stages |

Figures above are factory-measured for this model. Manually measured dimensions may vary slightly; refer to the actual machine.
Two stages, one pump, four casters
The height comes from the second scissor stage, not from a taller handle or a longer ram. Everything below it — pump, frame, casters — is the same kit as the single-stage cart.

The second stage is the extra 540 mm
A single-stage cart stops around bench height. Stacking a second X on common pins takes the same deck up to 1260 mm without making the cart longer on the floor.
Shared centre pins keep the deck level
Both stages pivot on the same centre pins, so the deck rises vertically instead of swinging out. A stacked load stays where you put it.

700 × 450 mm deck on a yellow frame
700 × 450 mm with a 35 mm edge. Yellow powder coat over steel, so the deck edge reads against a grey warehouse floor when the cart is loaded.
Chrome push handle at 810 mm, folding forward onto the frame. The pump handle runs at the frame and the lowering lever sits by the grip, so one operator can raise and lower without walking round the cart.
For the shelf that is too high to reach and too heavy to lift
This is a hand-pumped cart for the second and third shelf, not the floor. It also happens to be the lift cart you can use in a building with no power point at the aisle.
- Racking and shelvingTake the deck up to the level you are picking from and slide the box across — no ladder, no lifting above your shoulder.
- Assembly and fittingHold a part at 1260 mm while you fit it. The deck stays where you pump it, so the cart works as a mobile bench.
- Van, trailer and container loadingRaise the deck towards the load bed and slide the goods in, then pump down and fold the handle to stow the cart.
- Shops, shows and site hutsWhere there is no socket within reach, the hand pump is the difference between lifting stock by hand and rolling it into place.
Custom options on this two-stage cart
The yellow 700 × 450 mm build is standard. When the deck has to match your own crate, shelf or vehicle, the same scissor and pump are built to your drawing.

- Deck sizeStandard 700 × 450 mm; built to the length and width your crate, shelf or vehicle floor needs.
- Deck surfaceA plain steel deck is standard. A checker plate, a coated deck or a stainless deck can be specified for wet or food-contact work.
- Frame colour and finishYellow frame and deck are standard. A specified colour can be applied to match the equipment already on your site.
- Your logoSend the artwork and your logo is applied before the cart leaves the factory. The marking is confirmed with you before production starts.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this cart ships on a pallet.
-
You place the order online
Your order is recorded and the cart is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does this cart lift?
Why two scissor stages instead of one?
Is it manual or powered?
How much does it carry?
How do you lower the deck?
What wheels does it run on?
Does it fit through a doorway and store away?
What does it cost, and how is freight worked out?
For manual materials-handling safety guidance, see OSHA's ergonomics guidance.








Reviews
There are no reviews yet.