Manual Hydraulic Lift Table CartSKU: TMB-MH200-404996804
A 700 × 450 mm deck that goes up to 720 mm on a hand pump — no battery, no charger, no leads across the floor. Pump it up, wheel it where you need it, drop the lever to lower.
- ✓
Held in stock in the standard 700 × 450 mm build and dispatched from our own warehouse. A different deck size, deck surface, colour or logo is built to order — see custom options.
- ✓
Built to the specification published here — same single-stage scissor, manual pump and braked casters on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
720 mm of lift without a battery, a charger or a lead
This is the lift cart you keep where there is no socket: a hand pump raises the deck, a lever lowers it, and nothing on the machine needs charging between shifts.
720 mm from a hand pump
The single-stage scissor takes the deck from the frame to 720 mm. Pump the handle and it climbs; nothing to plug in, and no battery that goes flat at the end of a shift.
700 × 450 mm deck, 35 mm thick
A steel deck with a 35 mm edge, big enough for a crate, a stack of boxes or a machine part. The edge is banded so a load can be strapped down without crushing the deck lip.
150 kg or 200 kg build
The same cart is supplied in two load ratings. Tell us the load and we quote the build that carries it; the deck, the scissor and the wheels are matched to the rating.
Release lever, not a bleed screw
Lowering is done with the lever beside the grip. You drop the deck at the speed you choose and stop it where you want it — no bending down to a valve at floor level.
Braked swivel casters
Four casters, the front pair swivelling to steer. The brake pedal locks the wheel and the swivel at once, so the cart stays put while the deck goes up under load.
810 mm handle, folds to the frame
The handle sits at 810 mm — push height for a standing operator — and folds down onto the frame so the cart stores under a bench or travels in a van.
Manual hydraulic lift table cart: technical data
Figures are for the standard build and come from the factory drawing. Ask us for a drawing with the raised height and the deck marked if you need to check the cart against a bench or a van floor.
Lifting
| Lifting mechanism | Single-stage scissor, manual hydraulic pump |
| Max deck height | 720 mm |
| Deck thickness | 35 mm |
| Lowering | Release lever at the handlebar |
| Rated load | 150 kg build / 200 kg build |
Build
| Deck size | 700 × 450 mm |
| Frame | Welded steel, powder coated red |
| Wheels | 4 casters, front pair swivel with brake |
| Handle height | 810 mm, folds to the frame |
| Scissor finish | Black with yellow hazard stripe |

Figures above are factory-measured for this model. Manually measured dimensions may vary slightly; refer to the actual machine.
Pump, scissor, casters — three parts and no wiring
Everything that moves on this cart is mechanical: a pump handle, a single scissor stage, and four casters. There is no battery box, no motor and nothing to charge.

The pump handle sits at the frame
A hydraulic pump handle runs at the bottom of the handle frame. Short strokes raise the deck a little at a time, so you can stop it at any height between the frame and 720 mm.
Release lever beside the grip
The lowering lever is on the handlebar, within reach of your hand. Squeeze it and the deck comes down under control instead of dropping.

One pedal locks wheel and swivel
The brake pedal on the caster stops the wheel turning and stops the fork swivelling. Press it before you pump the deck up and the cart cannot creep while the load is in the air.
Front pair swivels
The front two casters swivel, so the cart turns in a bench aisle or a doorway without lifting the load off the deck.

700 × 450 mm of steel deck
700 × 450 mm with a 35 mm edge, powder coated red over steel. Wide enough for a crate or a stack of cartons, short enough to turn inside a workshop aisle.
A single scissor stage finished in black with yellow hazard stripe, driven by one hydraulic ram under the deck. Fewer joints than a two-stage scissor, and nothing to service but the pump.
The lift you can use where there is no socket
A hand-pumped cart earns its place on sites where a battery lift is a nuisance: no charging, no leads, no waiting. Load at floor level, pump to bench height, wheel it away.
- Workshops and assemblyRaise a motor, a jig or a sub-assembly to working height and hold it there while you fit it — the cart becomes the bench.
- Warehouse and storesTake the deck up to the shelf you are picking from instead of climbing with the box, then pump it down and roll on.
- Van and trailer loadingRaise the deck towards the load bed, slide the goods across, then drop the deck and fold the handle to stow the cart in the van.
- Shops, exhibitions and site hutsMove stock, plinths and equipment where there is no power point within reach, and lift without asking a second person to help.
Custom options on this lift cart
The 700 × 450 mm deck is the standard build. When the deck has to match your own crate, bench or vehicle, the same scissor and pump are built to your drawing.

- Deck sizeStandard 700 × 450 mm; built to the length and width your crate, bench or vehicle floor needs.
- Deck surfaceA plain steel deck is standard. A checker plate, a coated deck or a stainless deck can be specified for wet or food-contact work.
- Frame colour and finishRed frame is standard. A specified colour can be applied to match the equipment already on your site.
- Your logoSend the artwork and your logo is applied before the cart leaves the factory. The marking is confirmed with you before production starts.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this cart ships on a pallet.
-
You place the order online
Your order is recorded and the cart is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it lift?
Is it manual or powered?
How much weight will it carry?
How do you lower the deck?
What wheels does it run on?
How big is the deck, and can it be changed?
Does it fold for storage or transport?
What does it cost, and how is freight worked out?
For manual materials-handling safety guidance, see OSHA's ergonomics guidance.








Reviews
There are no reviews yet.