Red Two-Stage Manual Lift Table CartSKU: TMB-TS150-405063376
A 700 × 450 mm deck that reaches 1260 mm on a hand pump and stops wherever you let go of the lever. Two scissor stages, four braked casters, no battery to charge.
- ✓
Held in stock in the standard red 700 × 450 mm build and dispatched from our own warehouse. A different deck size, deck surface, colour or logo is built to order — see custom options.
- ✓
Built to the specification published here — same two-stage scissor, manual pump, braked casters and folding handle on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
Deck at 1260 mm, feet on the floor, nothing to charge
The pump does the lifting, the two stages give the height, and the casters hold the cart still while you work. That is the whole machine — there is no battery to swap and no charger to find.
1260 mm working height
Two scissor stages stacked on common pins lift the 35 mm deck to 1260 mm — racking level, mezzanine rail, or the working height of a bench with a machine standing on it.
Red deck and frame, hazard-striped scissor
Red powder coat on the deck and frame with black and yellow stripe on the scissor legs. The colour makes the cart easy to spot in a busy bay and easy to match to the rest of your equipment.
Pump handle at the frame
You pump from the frame with short strokes, so the deck moves in small steps and can be parked at any height between the base and 1260 mm. No electrics, no battery, no leads.
Release lever under your hand
Lowering is controlled from the lever beside the handlebar grip. Squeeze it and the deck descends at the speed you allow — nothing to bend down for, nothing that drops.
Four casters with brakes
Polyurethane wheels on steel forks, front pair swivelling to steer. Each brake locks the wheel and the swivel at once, so the cart sits still while the deck is up under load.
Folding handle for transport
The handle folds forward onto the frame. The cart then parks under a bench, goes into a van, or ships on a pallet without a tall crate around it.
Red two-stage lift table cart: technical data
Figures come from the factory drawing for the standard build. If the deck has to meet a specific shelf or a vehicle floor, ask us for a drawing with the raised height marked.
Lifting
| Lifting mechanism | Two-stage scissor, manual hydraulic pump |
| Max deck height | 1260 mm |
| Deck thickness | 35 mm |
| Lowering | Release lever at the handlebar |
| Rated load | 150 kg |
Build
| Deck size | 700 × 450 mm |
| Finish | Red powder coat on deck and frame |
| Handle | Folding push handle, 810 mm |
| Wheels | 4 PU casters, front pair swivel, brakes |
| Scissor | Black steel, two stages, hazard stripe |

Figures above are factory-measured for this model. Manually measured dimensions may vary slightly; refer to the actual machine.
Where the height comes from, and where the load sits
The lift is two scissor stages driven by a single hydraulic ram; the load path runs from the deck, through the leg pins, into the base frame and down through the casters.

The brake locks wheel and swivel
Polyurethane on a steel fork, with a brake pedal that stops the wheel turning and the fork swivelling. Set it before the deck goes up and the cart does not creep under a raised load.
Base frame carries the pump and the ram
The pump, the ram foot and the lower scissor pins all sit in one welded steel base frame, so the reaction force of the ram stays inside the cart.

Two stages on shared pins
Both stages pivot on the same centre pins, so the deck rises vertically. Nothing swings out over the side while the deck climbs.
Stop at any point on the way up
The pump works in short strokes and holds wherever you stop. That matters when the shelf is at 900 mm and the maximum is 1260 mm.

700 × 450 mm, 35 mm thick
700 × 450 mm with a 35 mm banded edge, powder coated red. Long enough for a crate or a generator, narrow enough to turn between benches.
Folding push handle at 810 mm. It takes the lowering lever and the pump cable, and folds forward so the cart stores flat.
Work at height without a ladder or a battery
This cart is for the second and third level of a rack, the tailgate of a van, or a bench where the part weighs more than you want to lift. Pump, work, lower, move on.
- Stores and pickingRaise the deck to the shelf you are working at and slide the carton across, instead of carrying it down a ladder.
- Machine shops and fittingHold a component at 1260 mm while you fit or inspect it — the cart becomes the bench and the crane you did not have.
- Loading and despatchDeck up to the load bed height, goods slid straight in; then pump down, fold the handle and stow the cart under the bench.
- Yards and outbuildingsNo socket in the shed is no problem: the pump handle is the only power source the cart needs.
Custom options on this lift cart
Red is the standard finish on this build. Deck size, deck surface and colour can all be changed, and your logo can be applied before the cart leaves the factory.

- Deck sizeStandard 700 × 450 mm; built to the length and width your crate, shelf or vehicle floor needs.
- Deck surfaceA plain steel deck is standard. A checker plate, a coated deck or a stainless deck can be specified for wet or food-contact work.
- Frame colour and finishRed deck and frame are standard. Any specified colour can be applied to match the equipment already on your site.
- Your logoSend the artwork and your logo is applied before the cart leaves the factory. The marking is confirmed with you before production starts.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this cart ships on a pallet.
-
You place the order online
Your order is recorded and the cart is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it go, and how big is the deck?
Does it need power or a battery?
How much weight does it take?
Can I stop the deck part-way up?
How is the deck lowered?
Will the cart move while the deck is up?
Can the colour, deck size or deck surface be changed?
What does it cost, and how is freight worked out?
For manual materials-handling safety guidance, see OSHA's ergonomics guidance.








Reviews
There are no reviews yet.