Professional Lifting Equipment Manufacturer

Tall Wall-Mounted Guide Rail Lift with Top-Mounted Electric Winch, 6–10 m

TMB-WRLT-524017533

Wall-mounted guide rail lift for goods between floors up to four storeys apart. Lifting height 6 m, 7 m, 8 m, 9 m or 10 m, with rails 7.4 m, 8.4 m, 9.4 m, 10.4 m or 11.4 m long. Deck 1000 × 800 mm inside 800 mm guardrails on three sides, cage footprint about 1000 × 1000 mm, rail frame 700 mm across with a 760 mm carriage.

Home/Mast Lift/Tall Wall-Mounted Guide Rail Lift, 6–10 m
In stock · ready to ship

Tall Wall-Mounted Guide Rail Lift, 6–10 mSKU: TMB-WRLT-524017533

The long-run version of the wall-mounted rail lift: rails up to 11.4 m bolted to an existing wall, a caged 1000 × 800 mm deck, and the electric winch fixed at the head of the rails where it never travels with the load.

Lifting height
6 / 7 / 8 / 9 / 10 m
Deck
1000 × 800 mm
Overall height
7.4 – 11.4 m
Guardrail
800 mm high
Price on request
Standard build · 6–10 m lift, deck 1000 × 800 mm — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard heights and dispatched from our own warehouse. Another height, a wider deck or a different colour is built to order — see custom options.
  • ✓
    Built to the specification published here — same rails, winch, rope and deck on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

Three to four storeys, one pair of rails

Same rails, same winch and same deck as the short version — built long enough to reach the third or fourth floor of a building that has no lift shaft and never will.

01

Six to ten metres of lift

Standard builds lift 6, 7, 8, 9 and 10 m, on rails of 7.4, 8.4, 9.4, 10.4 and 11.4 m. The extra 1.4 m is where the deck stands when it is at the top, so measure the headroom above the upper landing before you order.

02

The drive stays at the head

The winch is bolted to the top cross member and pulls the platform up from above. On a 10 m run that matters: the motor and drum never travel, so the rails only carry the deck and what is on it, not the drive as well.

03

Brackets in tiers along the wall

A rail run this long is held off the wall at several heights, not just at the top and bottom, and the brackets are drawn for the wall you have. There is no floor frame, no shaft and no pit — the building's own wall takes the load.

04

1000 × 800 mm deck, rails on three sides

The deck is steel plate inside 800 mm guardrails on three sides, front open for loading at floor level. The cage footprint is about 1000 × 1000 mm, and it comes down level with the floor at the bottom of the run.

Specifications

Six to ten metres: the technical data

Five standard heights on the same rail frame and deck. Pick by the lifting height you need; the rails are always 1.4 m longer than the lift, because the deck has to stand at the top of the run.

Model Lifting height Overall height Deck Guardrail
S 6 m 7.4 m 1000 × 800 mm 800 mm
M 7 m 8.4 m 1000 × 800 mm 800 mm
L 8 m 9.4 m 1000 × 800 mm 800 mm
XL 9 m 10.4 m 1000 × 800 mm 800 mm
XXL 10 m 11.4 m 1000 × 800 mm 800 mm

Lifting & drive

Drive Electric winch bolted to the top cross member — the drive does not travel
Rope Steel wire rope from the drum, over a pulley block at the head, down to the platform
Lifting height 6 / 7 / 8 / 9 / 10 m
Overall height 7.4 / 8.4 / 9.4 / 10.4 / 11.4 m
Load rating Set on the drawing against the deck and the winch you need
Control Push-button pendant on a cable to the winch, plus a box on the rail
Power supply Confirmed per destination on the quotation drawing

Deck, rails & fixing

Deck 1000 × 800 mm steel plate, guardrails on three sides
Cage footprint About 1000 × 1000 mm including the guardrail frame
Guardrail 800 mm high, three sides, loading side open
Rail frame Two rails, 700 mm across, 760 mm carriage
Fixing Steel wall brackets in tiers along the rails — no floor frame, no shaft, no pit
Finish Welded steel, primed and painted
Colours Yellow-orange and blue as shown; other colours to order
Dimension drawing of the tall guide rail lift for the 6 m build, marked 700 mm frame width, 760 mm carriage, 7400 mm overall height, 1000 × 1000 mm footprint and 800 mm guardrail
Size S on the sheet: 7400 mm of rail for 6000 mm of lift, 700 mm across the frame, a 760 mm carriage, an 800 mm guardrail and a deck of about 1000 × 800 mm. The M, L, XL and XXL builds are the same machine on longer rails — 8.4, 9.4, 10.4 and 11.4 m for 7, 8, 9 and 10 m of lift.
Built to order on this model Height is the usual change, and five heights are standard. A deck wider than 1000 × 800 mm, rails longer than 11.4 m, a different guardrail layout or a colour other than yellow-orange and blue is built to order — send the floor-to-floor height, a photo of the wall and the weight you need to move.

Manually measured dimensions may vary slightly; refer to the actual machine. Height, deck size, bracket layout, colour, winch rating and power supply for a specific build are confirmed on the quotation drawing.

Build detail

Winch at the head, deck on two long rails

The winch is bolted to the top of the frame, the rope runs over the pulley block and down to the platform, and the rails are tied to the wall in tiers so a long run stays straight against the building.

Top of the rails with the electric winch bolted to the cross member, its control box and a blue pulley block with wire rope running down
Drive

Everything that lifts sits at the top

Winch

The electric winch and its control box are bolted to the top cross member, out of the way of the load. On a 6 to 10 m run this is the whole point of the layout: the heavier parts of the drive never come down to where goods and people are working.

Rope

One rope run, in the open

Rope

The rope leaves the drum, passes over the pulley block at the head and runs down to the carriage between the two rails. It is visible for the entire length, so a frayed strand or a slack rope is picked up on the walk-round rather than inside a sealed mast.

Caged platform of the tall guide rail lift with a steel deck and 800 mm guardrails on three sides
Deck

1000 × 800 mm deck, rails on three sides

Platform

The deck is 1000 × 800 mm of steel plate inside 800 mm guardrails, front open so goods go on at floor level from a pallet truck or by hand. A load that sits to one corner still leaves the deck flat, because the carriage is welded box section, not folded sheet.

Fixing

Tied to the wall in tiers

Mounting

The two rails are held off the wall on steel brackets at several heights along the run, so a long frame stays straight and does not lean on the wall. There is no floor frame and nothing to step over at the bottom: the deck comes down level with the floor.

Where it is used

Facades, stair towers and tall stockrooms

For buildings of three or four floors with goods to move and no shaft to put a lift in: the rails go up the wall that is already there, and the floor stays clear at both ends.

  • Building facadesThe rails are fixed up an outside wall and the deck lands at a balcony, a yard door or a steel platform, so goods come up from the ground without being carried through the building.
  • Stair towers and landingsRails bolted beside an external stair bring goods up to the level of the landing, which is where the stair already stops — no extra structure has to be built for the lift.
  • Factory and warehouse wallsCartons, parts and drums go from the loading floor to a third-floor store along a wall, with the deck loaded at floor level at the bottom of the run.
  • Tall stockroomsDeliveries come in at the back door and go straight up two or three floors along the wall, on a lift that takes less floor space than the ramp or the stair it replaces.
  • Facade
  • Stair tower
  • Factory wall
  • Warehouse
  • Stockroom
  • Yard
Built to order

Custom options on this rail lift

Five heights and two colours are standard. Anything beyond that is built on the same rail frame and deck, from the same drawings.

Blue tall guide rail lift fixed to an external wall with the platform raised to a steel landing
Blue build, landing at a steel platform: rails bolted up the wall in tiers, deck raised to the level of the landing, winch at the head. Height, deck size, bracket layout and colour are built to order.
  • Lifting height6, 7, 8, 9 and 10 m of lift are standard, with rails of 7.4 to 11.4 m. A height between those figures is built to the job — send the floor-to-floor distance and the headroom above the upper landing.
  • Deck1000 × 800 mm is standard. A wider or deeper deck is built on the same carriage, and the guardrail can be opened on a different side to suit the way you load.
  • ColourYellow-orange and blue are standard, as shown in the photos. Any other colour is matched when you order, and your logo can be applied before the machine leaves the factory.
  • Fixing and ratingThe brackets are drawn in tiers for the wall you have — send photos of it and of each landing. The winch, rope and shackle are sized for the weight you declare per trip, and both go on the quotation drawing.
How a built-to-order unit is confirmed Send the floor-to-floor height, the height of the wall, a photo of each landing, the weight per trip and the site voltage. We confirm the height, deck, bracket tiers and winch on a drawing before the machine is built — nothing is cut until you have approved it.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for smaller parts. The rails are the long item in the crate, and an 11.4 m rail is a different shipment from a 7.4 m one — freight is priced per height and per destination.

  1. You place the order online

    Your order is recorded and the machine is reserved while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout Sea rates change weekly and depend on the port, the length of the rails and whether you combine this lift with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What arrives in the crate Rails, top cross member with the winch, pulley block, rope, platform, brackets and control, packed with the drawing we agreed. The winch is filled and the lift commissioned on site by the fitter who installs it.
Questions buyers ask

Frequently asked questions

Which height do I need?
Match the lifting height to the floor-to-floor distance, not to the rail length. 6, 7, 8, 9 and 10 m of lift are standard, and the rails are always 1.4 m longer — 7.4 to 11.4 m — because the deck has to stand at the top of the run. Check the headroom above the upper landing before you order.
How much does it lift?
The frame is built for goods loads, and the winch, rope and shackle are sized to the weight you declare per trip. Send that figure and the deck size you need, and the rating goes on the quotation drawing — we do not publish a capacity that the winch has not been sized for.
How is a mast this tall fixed to the wall?
The two rails are held off the wall on steel brackets at several heights along the run, not only at the top and bottom. Send photos of the wall — what it is built of, how thick it is and what is behind it — and the bracket tiers are drawn for that wall and confirmed before the machine is built.
Does it need a shaft or a pit?
No. There is no shaft, no pit and no machine room: the wall carries the rails, the winch sits at the head of them, and the platform comes down level with the floor at the bottom of the run, so nothing has to be recessed or built around the lift.
What power supply does it need?
The winch is built to the site voltage, and the exact motor, cable and control voltage are confirmed per destination on the quotation drawing. The standard control is a push-button pendant on a cable to the winch, with a box on the rail.
What is different from the shorter version?
Only the length of the rails and the rope: the winch, carriage, deck and brackets are the same parts. The 2 to 5 m version is the same machine on rails of 3.4 to 6.4 m, and it is listed separately if your building is only one floor.
What colours can I have?
Yellow-orange and blue are standard, and both are shown in the photos on this page. Any other colour is matched to a sample when you order, and your logo can be applied to the rails or the deck before the machine leaves the factory.
How long does delivery take?
Sea freight from China to most destinations runs about 40 to 50 days door to door, on top of the build time for the height and options you order. The date is confirmed with the freight quote, and nothing is dispatched until you have approved both the drawing and the freight.

For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.

Price on request6–10 m lift · 1000×800 deck · winch at the head

Quote

Reviews

There are no reviews yet.

Be the first to review “Tall Wall-Mounted Guide Rail Lift with Top-Mounted Electric Winch, 6–10 m”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.