Tall Wall-Mounted Guide Rail Lift, 6–10 mSKU: TMB-WRLT-524017533
The long-run version of the wall-mounted rail lift: rails up to 11.4 m bolted to an existing wall, a caged 1000 × 800 mm deck, and the electric winch fixed at the head of the rails where it never travels with the load.
- ✓
Held in stock in the standard heights and dispatched from our own warehouse. Another height, a wider deck or a different colour is built to order — see custom options.
- ✓
Built to the specification published here — same rails, winch, rope and deck on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
Three to four storeys, one pair of rails
Same rails, same winch and same deck as the short version — built long enough to reach the third or fourth floor of a building that has no lift shaft and never will.
Six to ten metres of lift
Standard builds lift 6, 7, 8, 9 and 10 m, on rails of 7.4, 8.4, 9.4, 10.4 and 11.4 m. The extra 1.4 m is where the deck stands when it is at the top, so measure the headroom above the upper landing before you order.
The drive stays at the head
The winch is bolted to the top cross member and pulls the platform up from above. On a 10 m run that matters: the motor and drum never travel, so the rails only carry the deck and what is on it, not the drive as well.
Brackets in tiers along the wall
A rail run this long is held off the wall at several heights, not just at the top and bottom, and the brackets are drawn for the wall you have. There is no floor frame, no shaft and no pit — the building's own wall takes the load.
1000 × 800 mm deck, rails on three sides
The deck is steel plate inside 800 mm guardrails on three sides, front open for loading at floor level. The cage footprint is about 1000 × 1000 mm, and it comes down level with the floor at the bottom of the run.
Six to ten metres: the technical data
Five standard heights on the same rail frame and deck. Pick by the lifting height you need; the rails are always 1.4 m longer than the lift, because the deck has to stand at the top of the run.
| Model | Lifting height | Overall height | Deck | Guardrail |
|---|---|---|---|---|
| S | 6 m | 7.4 m | 1000 × 800 mm | 800 mm |
| M | 7 m | 8.4 m | 1000 × 800 mm | 800 mm |
| L | 8 m | 9.4 m | 1000 × 800 mm | 800 mm |
| XL | 9 m | 10.4 m | 1000 × 800 mm | 800 mm |
| XXL | 10 m | 11.4 m | 1000 × 800 mm | 800 mm |
Lifting & drive
| Drive | Electric winch bolted to the top cross member — the drive does not travel |
| Rope | Steel wire rope from the drum, over a pulley block at the head, down to the platform |
| Lifting height | 6 / 7 / 8 / 9 / 10 m |
| Overall height | 7.4 / 8.4 / 9.4 / 10.4 / 11.4 m |
| Load rating | Set on the drawing against the deck and the winch you need |
| Control | Push-button pendant on a cable to the winch, plus a box on the rail |
| Power supply | Confirmed per destination on the quotation drawing |
Deck, rails & fixing
| Deck | 1000 × 800 mm steel plate, guardrails on three sides |
| Cage footprint | About 1000 × 1000 mm including the guardrail frame |
| Guardrail | 800 mm high, three sides, loading side open |
| Rail frame | Two rails, 700 mm across, 760 mm carriage |
| Fixing | Steel wall brackets in tiers along the rails — no floor frame, no shaft, no pit |
| Finish | Welded steel, primed and painted |
| Colours | Yellow-orange and blue as shown; other colours to order |

Manually measured dimensions may vary slightly; refer to the actual machine. Height, deck size, bracket layout, colour, winch rating and power supply for a specific build are confirmed on the quotation drawing.
Winch at the head, deck on two long rails
The winch is bolted to the top of the frame, the rope runs over the pulley block and down to the platform, and the rails are tied to the wall in tiers so a long run stays straight against the building.

Everything that lifts sits at the top
The electric winch and its control box are bolted to the top cross member, out of the way of the load. On a 6 to 10 m run this is the whole point of the layout: the heavier parts of the drive never come down to where goods and people are working.
One rope run, in the open
The rope leaves the drum, passes over the pulley block at the head and runs down to the carriage between the two rails. It is visible for the entire length, so a frayed strand or a slack rope is picked up on the walk-round rather than inside a sealed mast.

1000 × 800 mm deck, rails on three sides
The deck is 1000 × 800 mm of steel plate inside 800 mm guardrails, front open so goods go on at floor level from a pallet truck or by hand. A load that sits to one corner still leaves the deck flat, because the carriage is welded box section, not folded sheet.
Tied to the wall in tiers
The two rails are held off the wall on steel brackets at several heights along the run, so a long frame stays straight and does not lean on the wall. There is no floor frame and nothing to step over at the bottom: the deck comes down level with the floor.
Facades, stair towers and tall stockrooms
For buildings of three or four floors with goods to move and no shaft to put a lift in: the rails go up the wall that is already there, and the floor stays clear at both ends.
- Building facadesThe rails are fixed up an outside wall and the deck lands at a balcony, a yard door or a steel platform, so goods come up from the ground without being carried through the building.
- Stair towers and landingsRails bolted beside an external stair bring goods up to the level of the landing, which is where the stair already stops — no extra structure has to be built for the lift.
- Factory and warehouse wallsCartons, parts and drums go from the loading floor to a third-floor store along a wall, with the deck loaded at floor level at the bottom of the run.
- Tall stockroomsDeliveries come in at the back door and go straight up two or three floors along the wall, on a lift that takes less floor space than the ramp or the stair it replaces.
Custom options on this rail lift
Five heights and two colours are standard. Anything beyond that is built on the same rail frame and deck, from the same drawings.

- Lifting height6, 7, 8, 9 and 10 m of lift are standard, with rails of 7.4 to 11.4 m. A height between those figures is built to the job — send the floor-to-floor distance and the headroom above the upper landing.
- Deck1000 × 800 mm is standard. A wider or deeper deck is built on the same carriage, and the guardrail can be opened on a different side to suit the way you load.
- ColourYellow-orange and blue are standard, as shown in the photos. Any other colour is matched when you order, and your logo can be applied before the machine leaves the factory.
- Fixing and ratingThe brackets are drawn in tiers for the wall you have — send photos of it and of each landing. The winch, rope and shackle are sized for the weight you declare per trip, and both go on the quotation drawing.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for smaller parts. The rails are the long item in the crate, and an 11.4 m rail is a different shipment from a 7.4 m one — freight is priced per height and per destination.
-
You place the order online
Your order is recorded and the machine is reserved while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
Which height do I need?
How much does it lift?
How is a mast this tall fixed to the wall?
Does it need a shaft or a pit?
What power supply does it need?
What is different from the shorter version?
What colours can I have?
How long does delivery take?
For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.










Reviews
There are no reviews yet.