Professional Lifting Equipment Manufacturer

Mobile Hydraulic Lift Flatbed Cart

TMB-FB300-405097285

Hand-pumped hydraulic scissor lift flatbed cart in two builds. 150 kg build: 700 x 450 mm deck, 35 mm thick, raising to 720 mm, handle 810 mm. 300 kg build: 815 x 500 mm deck, 50 mm thick, raising to 900 mm, handle 950 mm. Manual hydraulic pump with release lever, four red polyurethane casters with brakes and swivel locks, folding handle so the cart converts into a flat platform trolley.

Home/Scissor Lift/Scissor Lift Table/Mobile Hydraulic Lift Flatbed Cart
In stock · two builds

Mobile Hydraulic Lift Flatbed CartSKU: TMB-FB300-405097285

A hydraulic flatbed cart that lifts its own deck: 720 mm on the 150 kg build, 900 mm on the 300 kg build. Pump by hand, fold the handle down, and it becomes a flat platform trolley again.

Deck size
700 × 450 / 815 × 500 mm
Max height
720 / 900 mm
Rated load
150 kg / 300 kg
Pump
Manual hydraulic, release lever
Price on request
Two builds · 150 kg and 300 kg — unit price quoted with freight
Freight is quoted separately. Send us your destination port, the build and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Both builds are held in stock in the standard red finish and dispatched from our own warehouse. A different deck size, deck surface, colour or logo is built to order — see custom options.
  • ✓
    Built to the specification published here — same single-ram scissor, manual pump, braked casters and folding handle on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

A flatbed trolley that lifts its own deck

Roll the load on at floor level, pump the deck up to the height you are working at, and fold the handle down when you just need a flat platform. No battery, no charger, no lead.

01

Two builds, one design

The 150 kg build runs a 700 × 450 mm deck to 720 mm; the 300 kg build runs an 815 × 500 mm deck to 900 mm. Same pump, same casters, same folding handle — you pick the deck that matches the load.

02

Deck up to 900 mm on the big build

815 × 500 mm of steel deck, 50 mm thick, reaching 900 mm. That is a bench, a machine table or the load bed of a light van — the height most loads actually need.

03

Pump handle at the frame

Short strokes raise the deck a little at a time and it holds where you stop. You can park the deck at 600 mm for one job and 900 mm for the next without tools.

04

Release lever at the grip

Lowering is controlled from the lever beside the handlebar grip, so the deck descends at the speed you allow instead of dropping when a valve opens.

05

Folds into a flat platform trolley

Lower the deck and fold the handle down onto it: the cart becomes a flat platform truck for loads that never needed lifting. One machine covers both jobs.

06

Four casters, all braked

Red polyurethane wheels on steel forks, front pair swivelling. Each brake locks wheel and swivel together, so the cart cannot roll while the deck is up.

Specifications

Mobile lift flatbed cart: both builds side by side

Figures come from the factory drawings supplied with each build. Check the deck against your bench or vehicle floor before you order — we send the drawing for the build you pick.

Build Deck size Deck thickness Max height Handle
150 kg 700 × 450 mm 35 mm 720 mm 810 mm
300 kg 815 × 500 mm 50 mm 900 mm 950 mm

Lifting

Lifting mechanism Single scissor, manual hydraulic pump
Max deck height 720 mm (150 kg) · 900 mm (300 kg)
Deck thickness 35 mm (150 kg) · 50 mm (300 kg)
Lowering Release lever at the handlebar
Rated load 150 kg · 300 kg

Build

Deck size 700 × 450 mm · 815 × 500 mm
Frame Welded steel, powder coated red
Wheels 4 PU casters, front pair swivel, brakes
Handle Folding, 810 mm / 950 mm
Scissor Black steel, yellow hazard stripe
Dimension drawing of the 150 kg build: 700 x 450 mm deck, 35 mm thickness, 720 mm raised height, 810 mm handle
150 kg build, 700 × 450 mm: 35 mm deck rising to 720 mm, folding handle at 810 mm. The 300 kg build uses an 815 × 500 mm deck at 900 mm — its drawing is in the gallery above.
Built to order on this model Deck size, deck surface, frame colour and your logo can all be changed. A 500 kg version on the same 815 × 500 mm deck is available on request. Send the drawing or artwork and we confirm dimensions, materials and finish before production starts.

Figures above are factory-measured for each build. Manually measured dimensions may vary slightly; refer to the actual machine.

Build detail

Pump, scissor, casters, and a handle that folds flat

Nothing on this cart is powered except your arm. That is the point: it works in a shed with no socket, and there is no battery to replace after two seasons.

Lift cart with the deck lowered and the handle folded flat onto the deck
Folding

Handle folds onto the deck

Folded

With the deck down, the handle folds forward and lies on the platform. The cart becomes a flat trolley that slides under a bench or into a van, and the deck is still a load surface.

Hose and lever

Hydraulic hose stays inside the frame

Hose

The hose runs from the pump to the ram inside the frame line, so it cannot catch on a pallet edge and tear when the cart is pushed through a doorway.

Red polyurethane caster with brake pedal and swivel lock
Brakes

Wheel and swivel lock together

Brake

Every caster carries a brake pedal that stops the wheel turning and the fork swivelling. Set them before you pump and the deck goes up over a cart that cannot creep.

Steering

Front pair swivels

Swivel

The front two casters swivel, so the cart turns in a bench aisle or a lift doorway without lifting the load off the deck.

Mobile hydraulic lift flatbed cart, whole machine
Deck

Steel deck, red finish, hazard-striped scissor

Deck

700 × 450 mm at 35 mm thick on the 150 kg build, 815 × 500 mm at 50 mm on the 300 kg build. Steel, powder coated red, with a banded edge you can strap a load against.

Scissor

A single scissor stage in black with yellow hazard stripe, driven by one ram under the deck. One joint to watch, one ram to seal, nothing else to service.

Where it is used

From floor level to bench height, without a second pair of hands

This is a flatbed cart first and a lift second — which is why it gets used for both. Load it flat, lift it when the height matters, fold it down when it does not.

  • Workshops and machine shopsRoll a motor or a jig onto the deck at floor level, pump to working height and leave it there while you fit it.
  • Warehouse and storesTake the deck to the shelf instead of climbing to it, then pump down and wheel the load to despatch.
  • Van and trailer loadingRaise the deck towards the load bed, slide the goods across, fold the handle and roll the cart away.
  • Shops, shows and site hutsNo socket needed. Where a battery cart would sit idle waiting for a charge, the hand pump keeps working.
  • Workshop
  • Warehouse
  • Van loading
  • Retail
  • Events
  • Site
Built to order

Custom options on this lift cart

The red 150 kg and 300 kg builds are standard. A 500 kg version on the 815 × 500 mm deck is available on request, and the deck itself can be built to your drawing.

Braked caster under the red frame of the lift cart
Standard build shown: red powder coat on deck and frame, black scissor with yellow hazard stripe, braked PU casters. Deck size, deck surface, colour and branding are built to order.
  • Deck size700 × 450 mm and 815 × 500 mm are standard; any length and width can be built to your crate, bench or vehicle.
  • Deck surfaceA plain steel deck is standard. A checker plate, a rubber-topped deck or a stainless deck can be specified for wet or food-contact work.
  • Load rating150 kg and 300 kg builds are held in stock; a 500 kg version on the 815 × 500 mm deck is made to order.
  • Frame colour and logoRed is standard, and any specified colour can be applied. Send the artwork and your logo goes on before the cart leaves the factory.
How a built-to-order unit is confirmed Send the drawing or artwork together with the deck size, deck surface, colour, load rating and quantity you need. We confirm dimensions, materials and finish before production starts, and the drawing for your build comes with the quotation.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this cart ships on a pallet.

  1. You place the order online

    Your order is recorded and the cart is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift cart with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What the freight quote includes Cost to your port or door, the shipping line and transit time, the earliest departure we can make, and the documents that travel with the goods. If we can cut your cost by combining this cart with others in one container, we will tell you before you pay.
Questions buyers ask

Frequently asked questions

What is the difference between the two builds?
The 150 kg build has a 700 × 450 mm deck, 35 mm thick, raising to 720 mm with an 810 mm handle. The 300 kg build has an 815 × 500 mm deck, 50 mm thick, raising to 900 mm with a 950 mm handle. Both use the same pump, casters and folding handle.
Is it manual or powered?
Manual. A hydraulic pump handle at the frame raises the deck; there is no battery, no motor and no charger, so nothing needs charging and there is no lead across the floor.
How high does the deck go?
720 mm on the 150 kg build and 900 mm on the 300 kg build, measured to the top of the deck. Both can be stopped at any height in between, because the pump holds wherever you stop.
Can it be used as a normal flatbed trolley?
Yes. Lower the deck and fold the handle forward onto it and the cart works as a flat platform trolley. That is why it suits sites that need a lift only some of the time.
How is the deck lowered?
With the release lever beside the handlebar grip. You control the speed with your hand, so a loaded deck comes down steadily and can be stopped part-way.
Will it roll while the deck is up?
Not with the brakes on. Every caster has a pedal that locks the wheel and the swivel together, so the cart stays square and still under a raised load.
Is there a heavier version?
Yes — a 500 kg version on the same 815 × 500 mm deck is available on request. Tell us the load and we quote the build that carries it, with its own drawing.
What does it cost, and how is freight worked out?
The unit price depends on the build and the quantity; freight is a separate line priced by weight, volume and destination port, so the quote shows the cart cost and the shipping cost side by side. Send the build, the quantity and the port you ship to.

For manual materials-handling safety guidance, see OSHA's ergonomics guidance.

Price on request150 / 300 kg · 720 / 900 mm

Quote

Reviews

There are no reviews yet.

Be the first to review “Mobile Hydraulic Lift Flatbed Cart”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.