Professional Lifting Equipment Manufacturer

Yellow Two-Stage Manual Lift Table Cart 1260 mm

TMB-TS150-405048278

Hand-pumped two-stage scissor lift table cart with a 700 x 450 mm deck 35 mm thick, lifting to 1260 mm. Two stacked scissor stages driven by a manual hydraulic pump; release lever at the chrome handlebar, no battery and no charger. Four red polyurethane casters with brakes and swivel locks, handle 810 mm and folds to the frame, yellow powder-coated frame and deck.

Home/Scissor Lift/Scissor Lift Table/Yellow Two-Stage Manual Lift Table Cart
In stock · ready to ship

Yellow Two-Stage Manual Lift Table CartSKU: TMB-TS150-405048278

Two scissor stages on one 700 × 450 mm deck, pumped by hand to 1260 mm — bench height plus a shelf. No battery, no charger, nothing to plug in.

Deck size
700 × 450 mm
Max height
1260 mm
Rated load
150 kg
Pump
Manual hydraulic, release lever
Price on request
Standard build · 700 × 450 mm deck — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard 700 × 450 mm yellow build and dispatched from our own warehouse. A different deck size, deck surface, colour or logo is built to order — see custom options.
  • ✓
    Built to the specification published here — same two-stage scissor, manual pump and red PU casters on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

1260 mm of lift — a bench plus a shelf — from a hand pump

One scissor stage gets you to bench height; the second one takes the same deck up to 1260 mm. That is the height of a mezzanine rail or the top shelf of a rack, reached without a ladder.

01

Two stacked scissor stages

Each stage is an X-shaped leg set on a common centre pin. Stacking two gives 1260 mm of height from a cart that still fits through a standard doorway when the deck is down.

02

700 × 450 mm deck, 35 mm thick

A steel deck banded at 35 mm, big enough for a crate, a generator or a stack of cartons, and narrow enough to push down a bench aisle.

03

150 kg on a hand pump

The pump handle sits at the frame; short strokes raise the deck a little at a time, so you can stop it at the shelf you are working at. Nothing to charge between jobs.

04

Chrome handle, release lever on the grip

The push handle is chrome tube at 810 mm with the lowering lever right beside the grip. You control the descent with your hand instead of bending to a valve.

05

Four red PU casters

Polyurethane wheels roll quietly on concrete and epoxy and do not mark a showroom floor. The front pair swivels, and each brake locks both the wheel and the swivel.

06

Folds flat for storage

The handle folds down onto the frame, so the cart parks under a bench or travels on a pallet without a tall crate around it.

Specifications

Yellow two-stage lift table cart: technical data

Figures come from the factory drawing for the standard build. Ask us for a drawing with the raised height marked if you need to check the cart against a specific shelf or bench.

Lifting

Lifting mechanism Two-stage scissor, manual hydraulic pump
Max deck height 1260 mm
Deck thickness 35 mm
Lowering Release lever at the handlebar
Rated load 150 kg

Build

Deck size 700 × 450 mm
Frame Welded steel, powder coated yellow
Handle Chrome tube, 810 mm, folds to the frame
Wheels 4 red PU casters, front pair swivel, brakes
Scissor Black steel, two stages
Dimension drawing: 700 x 450 mm deck, 35 mm deck thickness, 1260 mm raised height, 810 mm handle height
Standard build, 700 × 450 mm: the deck is 35 mm thick and rises to 1260 mm; the chrome handle stands 810 mm off the floor.
Built to order on this model Deck size, deck surface, frame colour and your logo can all be changed. Send the drawing or artwork and we confirm dimensions, materials and finish before production starts.

Figures above are factory-measured for this model. Manually measured dimensions may vary slightly; refer to the actual machine.

Build detail

Two stages, one pump, four casters

The height comes from the second scissor stage, not from a taller handle or a longer ram. Everything below it — pump, frame, casters — is the same kit as the single-stage cart.

Close-up of the two stacked scissor stages on the yellow lift cart
Scissor

The second stage is the extra 540 mm

Two stages

A single-stage cart stops around bench height. Stacking a second X on common pins takes the same deck up to 1260 mm without making the cart longer on the floor.

Pins

Shared centre pins keep the deck level

Pins

Both stages pivot on the same centre pins, so the deck rises vertically instead of swinging out. A stacked load stays where you put it.

Yellow two-stage manual lift table cart, whole machine
Deck

700 × 450 mm deck on a yellow frame

Deck

700 × 450 mm with a 35 mm edge. Yellow powder coat over steel, so the deck edge reads against a grey warehouse floor when the cart is loaded.

Handle and pump

Chrome push handle at 810 mm, folding forward onto the frame. The pump handle runs at the frame and the lowering lever sits by the grip, so one operator can raise and lower without walking round the cart.

Where it is used

For the shelf that is too high to reach and too heavy to lift

This is a hand-pumped cart for the second and third shelf, not the floor. It also happens to be the lift cart you can use in a building with no power point at the aisle.

  • Racking and shelvingTake the deck up to the level you are picking from and slide the box across — no ladder, no lifting above your shoulder.
  • Assembly and fittingHold a part at 1260 mm while you fit it. The deck stays where you pump it, so the cart works as a mobile bench.
  • Van, trailer and container loadingRaise the deck towards the load bed and slide the goods in, then pump down and fold the handle to stow the cart.
  • Shops, shows and site hutsWhere there is no socket within reach, the hand pump is the difference between lifting stock by hand and rolling it into place.
  • Racking
  • Assembly
  • Van loading
  • Retail
  • Events
  • Site
Built to order

Custom options on this two-stage cart

The yellow 700 × 450 mm build is standard. When the deck has to match your own crate, shelf or vehicle, the same scissor and pump are built to your drawing.

Two-stage scissor of the yellow manual lift cart
Standard build shown: yellow powder-coated frame and deck, black two-stage scissor, red PU casters. Deck size, deck surface, colour and branding are built to order.
  • Deck sizeStandard 700 × 450 mm; built to the length and width your crate, shelf or vehicle floor needs.
  • Deck surfaceA plain steel deck is standard. A checker plate, a coated deck or a stainless deck can be specified for wet or food-contact work.
  • Frame colour and finishYellow frame and deck are standard. A specified colour can be applied to match the equipment already on your site.
  • Your logoSend the artwork and your logo is applied before the cart leaves the factory. The marking is confirmed with you before production starts.
How a built-to-order unit is confirmed Send the drawing or artwork together with the deck size, deck surface, colour and quantity you need. We confirm dimensions, materials and finish before production starts. The standard yellow build stays in stock; a built-to-order unit is made after that confirmation.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this cart ships on a pallet.

  1. You place the order online

    Your order is recorded and the cart is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift cart with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What the freight quote includes Cost to your port or door, the shipping line and transit time, the earliest departure we can make, and the documents that travel with the goods. If we can cut your cost by combining this cart with others in one container, we will tell you before you pay.
Questions buyers ask

Frequently asked questions

How high does this cart lift?
1260 mm to the top of the deck, from a deck that is 35 mm thick. The two scissor stages stacked give that height; the chrome handle stands 810 mm off the floor for pushing and pumping.
Why two scissor stages instead of one?
One stage reaches roughly bench height. The second stage takes the same deck up to 1260 mm — racking and mezzanine level — without making the cart any longer on the floor.
Is it manual or powered?
Manual. A hydraulic pump handle at the frame raises the deck; there is no battery, no motor and no charger, so nothing needs charging and there is no lead across the floor.
How much does it carry?
150 kg in the standard build. The rating is the load on the deck; it does not fall as the deck rises, and the scissor and casters are matched to that figure.
How do you lower the deck?
With the release lever beside the handlebar grip. You control the descent with your hand, so the deck comes down steadily and can be stopped at any height on the way.
What wheels does it run on?
Four red polyurethane casters. The front pair swivels to steer, and each brake locks the wheel and the swivel together so the cart cannot creep while the deck is up.
Does it fit through a doorway and store away?
Yes — the floor frame is a compact cart footprint and the chrome handle folds forward onto the frame, so it parks under a bench or travels on a pallet.
What does it cost, and how is freight worked out?
The unit price depends on the build and the quantity; freight is a separate line priced by weight, volume and destination port, so the quote shows the cart cost and the shipping cost side by side. Send the deck size, the quantity and the port you ship to.

For manual materials-handling safety guidance, see OSHA's ergonomics guidance.

Price on request700 × 450 mm · 1260 mm · 150 kg

Quote

Reviews

There are no reviews yet.

Be the first to review “Yellow Two-Stage Manual Lift Table Cart 1260 mm”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.