Professional Lifting Equipment Manufacturer

Red Two-Stage Manual Lift Table Cart 1260 mm

TMB-TS150-405063376

Hand-pumped two-stage scissor lift table cart with a 700 x 450 mm steel deck 35 mm thick, lifting to 1260 mm. Manual hydraulic pump, release lever at the handlebar, no battery or charger. Four polyurethane casters with brakes and swivel locks, folding handle at 810 mm, red powder-coated deck and frame, black scissor with hazard stripe.

Home/Scissor Lift/Scissor Lift Table/Red Two-Stage Manual Lift Table Cart
In stock · ready to ship

Red Two-Stage Manual Lift Table CartSKU: TMB-TS150-405063376

A 700 × 450 mm deck that reaches 1260 mm on a hand pump and stops wherever you let go of the lever. Two scissor stages, four braked casters, no battery to charge.

Deck size
700 × 450 mm
Max height
1260 mm
Rated load
150 kg
Finish
Red deck and frame
Price on request
Standard build · 700 × 450 mm red — unit price quoted with freight
Freight is quoted separately. Send us your destination port and the quantity — you get the machine price and the shipping cost in one reply, so you can compare landed cost. See Shipping & Delivery for how it works.
Request a quote
  • ✓
    Held in stock in the standard red 700 × 450 mm build and dispatched from our own warehouse. A different deck size, deck surface, colour or logo is built to order — see custom options.
  • ✓
    Built to the specification published here — same two-stage scissor, manual pump, braked casters and folding handle on every unit we ship.
  • ✓
    Nothing ships until you approve the freight quote in writing.
  • ✓
    Packing list, commercial invoice and bill of lading sent with every shipment.
Why this model

Deck at 1260 mm, feet on the floor, nothing to charge

The pump does the lifting, the two stages give the height, and the casters hold the cart still while you work. That is the whole machine — there is no battery to swap and no charger to find.

01

1260 mm working height

Two scissor stages stacked on common pins lift the 35 mm deck to 1260 mm — racking level, mezzanine rail, or the working height of a bench with a machine standing on it.

02

Red deck and frame, hazard-striped scissor

Red powder coat on the deck and frame with black and yellow stripe on the scissor legs. The colour makes the cart easy to spot in a busy bay and easy to match to the rest of your equipment.

03

Pump handle at the frame

You pump from the frame with short strokes, so the deck moves in small steps and can be parked at any height between the base and 1260 mm. No electrics, no battery, no leads.

04

Release lever under your hand

Lowering is controlled from the lever beside the handlebar grip. Squeeze it and the deck descends at the speed you allow — nothing to bend down for, nothing that drops.

05

Four casters with brakes

Polyurethane wheels on steel forks, front pair swivelling to steer. Each brake locks the wheel and the swivel at once, so the cart sits still while the deck is up under load.

06

Folding handle for transport

The handle folds forward onto the frame. The cart then parks under a bench, goes into a van, or ships on a pallet without a tall crate around it.

Specifications

Red two-stage lift table cart: technical data

Figures come from the factory drawing for the standard build. If the deck has to meet a specific shelf or a vehicle floor, ask us for a drawing with the raised height marked.

Lifting

Lifting mechanism Two-stage scissor, manual hydraulic pump
Max deck height 1260 mm
Deck thickness 35 mm
Lowering Release lever at the handlebar
Rated load 150 kg

Build

Deck size 700 × 450 mm
Finish Red powder coat on deck and frame
Handle Folding push handle, 810 mm
Wheels 4 PU casters, front pair swivel, brakes
Scissor Black steel, two stages, hazard stripe
Dimension drawing: 700 x 450 mm deck, 35 mm deck thickness, 1260 mm raised height, 810 mm handle height
Standard build, 700 × 450 mm: 35 mm deck rising to 1260 mm, folding handle at 810 mm, four casters on the base frame.
Built to order on this model Deck size, deck surface, frame colour and your logo can all be changed. Send the drawing or artwork and we confirm dimensions, materials and finish before production starts.

Figures above are factory-measured for this model. Manually measured dimensions may vary slightly; refer to the actual machine.

Build detail

Where the height comes from, and where the load sits

The lift is two scissor stages driven by a single hydraulic ram; the load path runs from the deck, through the leg pins, into the base frame and down through the casters.

Red polyurethane caster with brake pedal under the red frame
Casters

The brake locks wheel and swivel

Brake

Polyurethane on a steel fork, with a brake pedal that stops the wheel turning and the fork swivelling. Set it before the deck goes up and the cart does not creep under a raised load.

Frame

Base frame carries the pump and the ram

Base

The pump, the ram foot and the lower scissor pins all sit in one welded steel base frame, so the reaction force of the ram stays inside the cart.

Two stacked scissor stages in black with yellow hazard stripe
Scissor

Two stages on shared pins

Stages

Both stages pivot on the same centre pins, so the deck rises vertically. Nothing swings out over the side while the deck climbs.

Height

Stop at any point on the way up

Height

The pump works in short strokes and holds wherever you stop. That matters when the shelf is at 900 mm and the maximum is 1260 mm.

Red two-stage manual lift table cart, whole machine
Deck

700 × 450 mm, 35 mm thick

Deck

700 × 450 mm with a 35 mm banded edge, powder coated red. Long enough for a crate or a generator, narrow enough to turn between benches.

Handle

Folding push handle at 810 mm. It takes the lowering lever and the pump cable, and folds forward so the cart stores flat.

Where it is used

Work at height without a ladder or a battery

This cart is for the second and third level of a rack, the tailgate of a van, or a bench where the part weighs more than you want to lift. Pump, work, lower, move on.

  • Stores and pickingRaise the deck to the shelf you are working at and slide the carton across, instead of carrying it down a ladder.
  • Machine shops and fittingHold a component at 1260 mm while you fit or inspect it — the cart becomes the bench and the crane you did not have.
  • Loading and despatchDeck up to the load bed height, goods slid straight in; then pump down, fold the handle and stow the cart under the bench.
  • Yards and outbuildingsNo socket in the shed is no problem: the pump handle is the only power source the cart needs.
  • Racking
  • Fitting
  • Despatch
  • Van loading
  • Yard
  • Workshop
Built to order

Custom options on this lift cart

Red is the standard finish on this build. Deck size, deck surface and colour can all be changed, and your logo can be applied before the cart leaves the factory.

Braked caster under the red frame of the lift cart
Standard build shown: red powder coat on deck and frame, black scissor with yellow hazard stripe, braked PU casters. Colour, deck size and branding are built to order.
  • Deck sizeStandard 700 × 450 mm; built to the length and width your crate, shelf or vehicle floor needs.
  • Deck surfaceA plain steel deck is standard. A checker plate, a coated deck or a stainless deck can be specified for wet or food-contact work.
  • Frame colour and finishRed deck and frame are standard. Any specified colour can be applied to match the equipment already on your site.
  • Your logoSend the artwork and your logo is applied before the cart leaves the factory. The marking is confirmed with you before production starts.
How a built-to-order unit is confirmed Send the drawing or artwork together with the deck size, deck surface, colour and quantity you need. We confirm dimensions, materials and finish before production starts. The standard red build stays in stock; a built-to-order unit is made after that confirmation.
Shipping & delivery

Freight is quoted separately and confirmed before dispatch

We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this cart ships on a pallet.

  1. You place the order online

    Your order is recorded and the cart is reserved for you while the freight is quoted.

  2. We send a freight quote in 24–48 hours

    Priced to your nearest port, with transit time, or to your door as DDP if you prefer.

  3. You confirm and pay the freight

    One invoice for the shipping cost. Nothing is dispatched until you approve it.

  4. We book, load and send documents

    Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.

Why we do not charge freight at checkout LCL and FCL rates change weekly and depend on the port, the total volume and whether you combine this lift cart with other machines. A fixed online rate would either overcharge you or force us to invoice the difference afterwards — so we quote it properly instead.
What the freight quote includes Cost to your port or door, the shipping line and transit time, the earliest departure we can make, and the documents that travel with the goods. If we can cut your cost by combining this cart with others in one container, we will tell you before you pay.
Questions buyers ask

Frequently asked questions

How high does it go, and how big is the deck?
1260 mm to the top of a 700 × 450 mm deck that is 35 mm thick. The handle folds to the frame and stands 810 mm when it is up.
Does it need power or a battery?
No. The lift is a manual hydraulic pump at the frame — no battery, no motor, no charger. You can use it in a shed, in a container or on a site with no power point.
How much weight does it take?
150 kg in the standard build, measured as load on the deck. The rating holds all the way up; the scissor pins and casters are sized for that figure.
Can I stop the deck part-way up?
Yes. The pump works in short strokes and holds wherever you stop, so the deck can be set to a 900 mm shelf just as easily as to its full 1260 mm.
How is the deck lowered?
With the release lever beside the handlebar grip. You control the speed by how far you squeeze, so the load comes down steadily rather than dropping.
Will the cart move while the deck is up?
Not if the brakes are set. Each caster has a pedal that locks both the wheel and the swivel, so the cart stays square and still while you load it at height.
Can the colour, deck size or deck surface be changed?
Yes — deck size, deck surface, frame colour and your logo are all made to order. The scissor, pump and casters stay as they are, and the deck and frame are built to your drawing.
What does it cost, and how is freight worked out?
The unit price depends on the build and the quantity; freight is a separate line priced by weight, volume and destination port, so the quote shows the cart cost and the shipping cost side by side. Send the deck size, the quantity and the port you ship to.

For manual materials-handling safety guidance, see OSHA's ergonomics guidance.

Price on request700 × 450 mm · 1260 mm · 150 kg

Quote

Reviews

There are no reviews yet.

Be the first to review “Red Two-Stage Manual Lift Table Cart 1260 mm”

Your email address will not be published. Required fields are marked *

Related Products

Scroll to Top

Get A Quote

Tell us your working height, load and site conditions — we’ll come back with the right lift and a firm price within 2 hours.