Small Cargo Elevator, 200 kg, 3 m LiftSKU: TMB-CE200-403366018
A 200 kg platform that runs up a 4 m track bolted to the wall. Crates, cartons and stock go from the street door to the first floor without a shaft, a pit or a machine room.
- ✓
Held in stock in the standard build and dispatched from our own warehouse. A longer track, a wider platform or a different colour is built to order — see custom options.
- ✓
Built to the specification published here — same rails, winch, rope and platform on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
Two hundred kilos, up one wall
For the shop or the stockroom where goods come in at street level and have to go up one floor, and there is no shaft to build. The track bolts to the wall, the platform lands on the floor and the winch stays at the top out of the way.
A platform that lands on the floor
The platform is 700 × 600 mm of steel plate and it comes down level with the floor, so a crate, a carton or a sack is slid on instead of being lifted over a lip. Up to 200 kg sits on the plate, spread across its full width.
Four metres of track, three of travel
The track is 4 m long and the platform stops 3 m above the floor — the height of one storey, a mezzanine or a loading dock above a stockroom. The last metre of track carries the winch, so the drive never has to be boxed in at the top.
Winch at the head, rope down the middle
A drum and gear motor are mounted at the top of the rails and a wire rope runs down the centre of the track to the platform. The drive is above the load and nothing mechanical sits on the floor, so the space in front of the wall stays free.
A button box on the wall
Up and down buttons in a box fixed beside the track, at the level you load from. There is no control cabinet and no separate starter — the box is the whole interface, and it sits at the height of the person using it.
Small cargo elevator: technical data
One standard build, measured off the track and the platform. The numbers below are the machine as shipped — a longer track or a wider platform is built to order.
Capacity & travel
| Load capacity | Up to 200 kg |
| Platform | 700 × 600 mm, steel plate |
| Track length | 4 m |
| Travel | 3 m above floor level |
| Machine weight | About 90 kg |
| Lifting | Electric winch with wire rope |
Build & installation
| Track | Two steel rails with cross bars |
| Platform | Steel plate between the rails |
| Drive | Drum, gear motor and rope at the head |
| Control | Wall box, up and down buttons |
| Fixing | Bolted to the wall — no shaft, no pit |
| Power supply | Confirmed per destination on the quotation drawing |
| Colour | Blue as standard |

Manually measured dimensions may vary slightly; refer to the actual machine. Track length, platform size, colour and power supply for a specific build are confirmed on the quotation drawing.
Rails on the wall, winch at the top
The whole machine is the track, the platform and the drive at the head. Nothing is buried in the floor, and the only thing on the wall is the track and a button box.

Two rails, bolted to the wall
The track is two steel rails joined by cross bars, fixed to the wall beside the opening with brackets. Nothing is dug and nothing is built around it, so the lift can go into a shop that is already finished and trading.
The button box goes where you stand
Up and down buttons in a wall box beside the track, at the level you load from. It is a small box on a lead, fitted at hand height, so whoever is loading is standing next to the platform when it moves.

A steel plate that comes down to the floor
700 × 600 mm of steel plate, landing level with the floor so goods are slid on rather than lifted over a lip. The plate takes the load across its whole width — a crate, a carton stack or a bag of stock sits on it without needing a pallet.
Winch at the head, rope down the middle
Drum, gear motor and wire rope are mounted at the top of the track, and the rope runs down the centre of the rails to the platform. The drive is above the load, so there is no pump, no tank and no hydraulic hose to route around the shop.
Shops, stockrooms and one-floor workshops
Anywhere goods arrive at street level and have to reach a floor above, and the building has a wall but no shaft: the lift takes the width of the track and nothing else.
- Shops and street-level deliveriesProduce, drinks and dry goods come in at the door and go straight up to the stockroom or the sales floor above, instead of being carried up the stairs crate by crate.
- Small warehouses and stockroomsCartons and spares move between the ground floor and a mezzanine or a first-floor rack area, on a platform that lands flush at both ends.
- Workshops and repair shopsParts, toolboxes and engines go up to a service floor or down to a bench, on a plate that takes 200 kg and does not need a forklift on either level.
- Basements and cellarsThe same machine works downwards: deliveries at street level go through an opening into a cellar store, with the track fixed to the wall of the stairwell.
Custom options on this cargo elevator
One track length is standard. A different height, a wider platform or another colour is built on the same rails and winch.

- Track length4 m of track with 3 m of travel is standard. A longer track for a taller floor, or a shorter one for a half-landing, is made to the floor-to-floor height you send.
- Platform700 × 600 mm is standard. A wider or deeper plate is built on the same carriage, and the edge can be fitted with a low lip if you load drums or round stock.
- ColourBlue as standard. Any other colour is matched when you order, and your logo can be applied before the machine leaves the factory.
- Control pointThe button box is fitted at the level you load from. A second station at the upper landing is built to order, so the platform can be called from either floor.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — the track packs down to a long, narrow crate, which keeps the cost low.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it lift?
What can it carry?
Does it need a shaft or a pit?
Where is the motor?
What power supply does it need?
Can it be fitted outdoors?
Can people ride on the platform?
What does it cost, and how is freight worked out?
For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.







Reviews
There are no reviews yet.