Cage Goods Lift, 800 kg, 3 mSKU: TMB-CL800-403371461
A mesh carrier that takes 800 kg through 3 m, on a frame that stands on its own base. Goods go in at the front of the cage and come out at the landing above — no shaft, no pit.
- ✓
Held in stock in the standard 3 m build and dispatched from our own warehouse. A taller frame, a bigger cage or another colour is built to order — see custom options.
- ✓
Built to the specification published here — same frame, carrier, hoist and rope on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
Eight hundred kilos in a mesh box
A goods lift for the yard, the warehouse or the back of a shop where there is no shaft: the frame stands on its own base, the carrier is a cage you load from the front, and the hoist works from the head of the frame.
A cage, not a bare platform
The carrier is a welded mesh cage on a steel deck — mesh on the back and both sides, open at the front. Cartons, sacks and boxes stay inside the cage while it travels, instead of being balanced on a plate.
800 kg on one carrier
The cage is rated to 800 kg, which covers a pallet of stock, a stack of cartons or a drum. Goods go in from the landing side and come out the same way at the top, so nothing has to be turned around in the air.
2.4 kW hoist at the head
A pure copper 2.4 kW motor drives a grooved drum through a gearbox, and galvanized wire rope runs from the drum to the carrier. The hoist is at the top of the frame, so the floor around the lift stays clear.
Stops at both ends of the run
Up and down travel protection cuts the drive at the top and bottom of the travel, so the carrier cannot be run into the head beam or through the floor. The control is a wireless remote, with a pendant station at the machine.
Cage goods lift: technical data
One standard machine on a square-tube frame. Capacity and hoist are fixed; the height and the cage are made to the job.
Capacity & drive
| Load capacity | Up to 800 kg |
| Lifting height | 3 m standard, customizable |
| Hoist motor | 2.4 kW pure copper motor |
| Rope | Galvanized wire rope |
| Control | Wireless remote + pendant station |
| Travel protection | Up and down limit stops |
Frame & carrier
| Material | International square-tube steel |
| Frame | Two posts, head beam and base chassis |
| Carrier | Welded mesh cage on a steel deck |
| Cage | Mesh on three sides, open at the front |
| Installation | Base bolted down, brackets for wall ties |
| Finish | Red frame, black carrier |
| Power supply | Confirmed per destination on the quotation drawing |

Manually measured dimensions may vary slightly; refer to the actual machine. Lifting height, cage size, colour and power supply for a specific build are confirmed on the quotation drawing.
Post, carrier, hoist, base
Six parts make up the machine: the hoist, the fixed posts, the carrier, the frame that ties them, the base it stands on, and the protection that stops it at each end.

Two posts and a head beam
The frame is square-tube steel: two posts, a head beam that carries the hoist, and a base chassis that ties the posts at the floor. Brackets on the posts take the wall ties at the landing, so the frame is held top and bottom.
A cage that opens at the front
The carrier is the mesh cage and its deck. Mesh on the back and the two sides keeps the load inside on the way up, and the front stays open so goods go in straight from the landing — no gate to open with your hands full.

Drum, gearbox and copper motor
The 2.4 kW pure copper motor drives a grooved drum through a gearbox, and the rope winds onto the drum as the carrier rises. A brake holds the load where it stops, so the carrier does not creep down while it is being loaded.
Stopped at the top and the bottom
Up and down travel protection ends the run in both directions. It is wired to cut the drive rather than rely on the operator releasing the button, so the carrier stops before it reaches the head beam or the floor.

A steel plate floor in the cage
The deck is a steel plate welded into the cage frame, so a box, a sack or a drum sits flat and the bottom of the cage does not flex under the load. It is the floor the goods actually stand on.
Bolted down, tied to the wall
The base chassis is drilled and bolted to a sound floor, and the post brackets are tied back to the wall at the landing. It is a fixed installation — no wheels, no towing, nothing to move before each lift.
Yards, warehouses and back rooms
For a fixed point where goods change level and a forklift or a stair will not do the job: the lift takes the footprint of its base frame and nothing else.
- Warehouses and stockroomsCartons and pallets of stock go from the ground floor to a mezzanine or a first-floor rack area, loaded through the open front of the cage at both ends.
- Shops and back roomsDeliveries come in at the back door and go up to the stockroom above, instead of being carried up the stairs a box at a time.
- Workshops and yardsParts, crates and drums go up to a service floor or a loading platform, on a cage that keeps the load contained while it travels.
- Farms and outbuildingsFeed, seed and tools go up to a loft or a first-floor store, on a lift that stands on its own base and needs no shaft built around it.
Custom options on this cage lift
The 3 m build is standard. A taller frame, a larger cage or another colour is made on the same posts and hoist.

- Lifting height3 m is standard and is the height most jobs need. A taller frame for a full storey, or a shorter one for a half-landing, is built to the floor-to-floor height you send.
- Cage sizeThe carrier is made to the load: wider and deeper for a pallet, narrower for cartons through a doorway. Tell us the largest thing you have to lift and we size the cage around it.
- ColourRed frame and black carrier as standard. Any other colour is matched when you order, and your logo can be applied before the machine leaves the factory.
- ControlWireless remote as standard, with a pendant station at the machine. A second control point at the upper landing is built to order, so the carrier can be called from either floor.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — the frame travels as posts plus a base, which packs into a compact crate.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it lift?
What size is the cage?
Does it need a shaft or a pit?
How is it controlled?
Is the motor powerful enough for 800 kg?
What power supply does it need?
Can people ride in the cage?
What does it cost, and how is freight worked out?
For fixed lifting installations used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.







Reviews
There are no reviews yet.