Fixed Electric Scissor Lift Platform 1300 × 820 mmSKU: TMB-FS1000-403349271
A 1300 × 820 mm steel platform that rises from 305 mm to 1780 mm on a two-stage scissor — bolted down where the work is, so the load comes to the platform instead of being lifted by hand.
- ✓
Held in stock in the standard 1300 × 820 mm build and dispatched from our own warehouse. A different platform size, lift height, colour or logo is built to order — see custom options.
- ✓
Built to the specification published here — same two-stage scissor, 220 kg machine weight and electric hydraulic power unit on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
A fixed platform that lifts the load to the height the job needs
The machine does not travel, so all of its weight and all of its steel go into holding the platform steady while it rises. That is what makes 1000 kg on a 1300 × 820 mm deck possible at a 220 kg machine weight.
1000 kg on a 1300 × 820 mm platform
A full sheet of steel plate forms the platform, trimmed with a stainless edge so the platform edge reads against a concrete floor. 1300 mm wide by 820 mm deep takes a pallet, a crate or a stack of panels without overhanging the scissor.
Two stages, 305 mm to 1780 mm
Two scissor stages stack the travel: the platform starts at 305 mm, low enough to slide a load across from a pallet truck, and rises to 1780 mm, which is working height for a bench, a mezzanine rail or a truck bed.
Electric hydraulic power unit
A motor and pump sit as one unit on the base frame, next to the hydraulic cylinder that drives the scissor. Press the button and the platform climbs under pump pressure; release it and the platform holds where you left it.
Fixed base, no casters to settle
The base is a welded tubular frame with four upright corner posts and no wheels, so the machine sits flat on the floor and stays where it was installed instead of creeping under a load.
Fixed electric scissor lift platform: technical data
Figures are for the standard build. Ask us for a drawing with the platform and the raised height marked if you need to check the machine against a bench, a mezzanine or a truck bed.
Lifting & power
| Lifting mechanism | Two-stage scissor (double scissor) |
| Drive | Electric hydraulic power unit — motor and pump on the base frame |
| Cylinder | Hydraulic ram inside the scissor, driven by the power unit |
| Control | Push-button pendant on a cable |
| Lift height | 305 – 1780 mm |
| Power supply | Confirmed per destination on the quotation drawing |
Build
| Platform size | 1300 × 820 mm |
| Platform | Steel plate, yellow edge with stainless trim |
| Scissor | Welded steel tube, black, hazard-striped at the joints |
| Base frame | Yellow tubular steel with four upright corner posts |
| Load capacity | 1000 kg |
| Machine weight | About 220 kg |
| Installation | Stationary — no casters, sits flat on the floor |

Manually measured dimensions may vary slightly; refer to the actual machine. Load rating and lift height for a specific build are confirmed on the quotation drawing.
What carries the platform, and what drives it
Three things do the work: the platform and the scissor stages under it, the hydraulic power unit on the base frame, and the tubular base that keeps the machine flat on the floor.

1300 × 820 mm of steel plate
A single steel plate forms the platform, edged in yellow with a stainless trim strip along the side. Nothing on the platform surface catches a carton as it slides across, and the edge reads clearly against a concrete floor.
Two stages, hazard-striped joints
Two scissor stages stack the lift into a compact closed height of 305 mm. The joints and the inner faces carry black and yellow hazard striping, so anyone working near the machine sees where the steel moves.

Motor and pump on the base frame
The motor and pump are mounted as one unit on the base frame, close to the cylinder that pushes the scissor. Keeping them low and central means the platform rises straight instead of loading one side of the scissor.
Tubular frame, four corner posts
A welded tubular frame with four upright posts at the corners. There are no casters, so the frame sits flat on the floor and the machine stays where it was installed under load.

Decide the height, then fix the machine
The machine is stationary, so the installation point is the job: measure the headroom above it for 1780 mm of platform travel plus the load, keep the pendant cable run clear, and leave access to the power unit for servicing. A level floor keeps the scissor and the platform square.
Push-button control on a cable
The platform is operated from a push-button pendant on a cable, so the operator stands back from the scissor while it moves instead of reaching into the mechanism.
The jobs where the height never changes, but the load does
A fixed platform suits a station that repeats the same lift all day: the machine is installed once at the height the work needs, and every load after that arrives at that height without anyone lifting it.
- Workbench and assembly stationsInstall the platform beside the bench at the height the bench runs at, and heavy parts arrive at working height instead of being lifted from the floor.
- Mezzanine and floor-to-floor transferSet the platform at a mezzanine edge or a raised floor, raise it to the upper level and slide goods across without a ramp or a hoist.
- Warehouse and dispatchA fixed lift point beside the packing line: the platform takes the carton up to the height of the pallet stack, and the operator works at a height their back can take.
- Workshops, plant and farm storesWhere a permanent lift point is needed and a mobile table would be in the way, the machine stays bolted down and out of the traffic route.
Custom options on this fixed lift platform
The 1300 × 820 mm platform with 305 – 1780 mm of travel is the standard build. When the platform has to match your own bench, mezzanine or pallet, the same scissor and power unit are built to your drawing.

- Platform sizeStandard 1300 × 820 mm; built to the length and width your bench, mezzanine or pallet needs.
- Lift heightStandard travel is 305 – 1780 mm. A lower closed height or a taller raised height can be built for a specific installation.
- Platform surfaceA plain steel platform is standard. A checker plate or a coated platform can be specified for wet or food-contact work.
- Frame colour and your logoYellow platform and base frame with black scissor is standard. A specified colour and your logo can be applied before the machine leaves the factory.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this machine ships as one crate on a pallet.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How big is the platform?
How high does it lift?
How much can it carry?
How is it powered and controlled?
Does the machine move?
How is it installed?
Can the platform size, lift height, surface, colour or logo be changed?
What does it cost, and how is freight worked out?
For fixed lifting equipment used in general industry, see OSHA 29 CFR 1910.176 on materials handling and storage.




Reviews
There are no reviews yet.