Self-Propelled Scissor Lift Platform, 4 mSKU: TMB-MS500-405695463
A 2010 × 830 mm platform that works at 4 m, driven and lifted from one joystick. Four outriggers go down before the scissor goes up — the machine is 670 kg and it does not rock.
- ✓
Held in stock in the standard 2010 × 830 mm build and dispatched from our own warehouse. A different platform size, deck surface, colour or logo is built to order — see custom options.
- ✓
Built to the specification published here — same four-stage scissor, joystick controller, outriggers and guardrail on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
Four metres of working height on a machine you can steer through a door
The scissor stacks four stages to reach 4 m, the platform is 2010 × 830 mm so two people and their tools fit, and the whole machine stows to 1120 mm high — low enough to move between sites on a trailer.
4 m working height
Four scissor stages take the platform to 4 m. That is a mezzanine, a racking top level, a ceiling grid or a factory roof beam — the heights a ladder is worst at.
2010 × 830 mm platform with guardrail
A steel platform with a bolt-on guardrail, mid-rail and kick plate. Long enough for two people and a toolbox, rated 500 kg of platform load.
One joystick for drive and lift
Travel and lift run from the same controller: a joystick for direction with buttons for raise, lower and speed. The operator does not walk the machine and then climb it.
Four screw outriggers
Outriggers at each corner wind down to the ground before the scissor goes up, so the machine footprint becomes four points on the slab instead of four wheels. The frame carries a warning to raise only with the legs down.
670 kg machine, 1120 mm stowed
The machine weighs 670 kg and stows to 2016 × 1000 × 1120 mm — a footprint that goes through a double doorway and onto a flatbed trailer without a ramp.
Hydraulic cylinder inside the scissor
One chrome ram drives the scissor stack from inside the leg set. Nothing sticks out at head height and the ram is protected by the frame.
Mobile scissor lift platform: full technical data
Figures are for the standard build. Ask for a drawing if the machine has to pass a doorway, a lift or a gate on your site — the stowed size is the number that matters there.
Lifting & power
| Lifting mechanism | Four-stage scissor, hydraulic cylinder |
| Working height | 4 m |
| Platform load | 500 kg |
| Controls | Joystick for travel, buttons for raise and lower |
| Stabilisers | Four screw outriggers, one per corner |
Build
| Platform size | 2010 × 830 mm |
| Guardrail | Bolt-on guardrail with mid-rail and kick plate |
| Stowed size | 2016 × 1000 × 1120 mm |
| Wheels | 4 wheels, blue tyres |
| Machine weight | 670 kg |
| Finish | Red frame and platform |

Figures above are factory-measured for this model. Manually measured dimensions may vary slightly; refer to the actual machine. Raise the platform only with the outriggers down.
What the platform stands on at 4 m
Four things matter on a lift this tall: the scissor stack, the ram inside it, the outriggers under it, and the guardrail around the top.

Drive and lift on one joystick
A joystick for direction and speed, with buttons for raise and lower on the same controller. Turtle and hare marks set the travel speed, so the machine can be crept in a tight aisle.
Chrome ram inside the leg set
The hydraulic cylinder sits between the scissor legs where the frame protects it. No rod at head height, nothing to catch a sleeve.
Four stages, one stack
Each stage adds roughly a metre. Stacking four gets 4 m of working height out of a machine that still stows to 1120 mm and rolls through a doorway.
Outriggers before lift
Screw outriggers at each corner take the load off the wheels. Wind all four down to the slab before the scissor goes up — the machine is meant to stand, not ride, at height.

2010 × 830 mm inside a guardrail
2010 × 830 mm of deck with a guardrail, mid-rail and kick plate. Room for two people, their tools and a parts box, rated 500 kg.
Four blue wheels under a red chassis that carries the power unit, the outrigger mounts and the scissor base. Stowed, the whole machine is 1120 mm high.
The work that happens four metres up
Racking, ceilings, services and inspection — the jobs where a ladder is slow, a scaffold is too much and a boom lift will not fit through the door.
- Warehouse and rackingWork the top beam level with both hands free, with the tools and the parts box on the platform beside you.
- Factories and plant roomsReach pipework, cable tray and light fittings at 4 m, then drive the machine to the next bay without climbing down.
- Fit-out and maintenanceCeiling grids, signage, ventilation and lighting: the platform goes where the work is and the guardrail keeps you on it.
- Facades and canopiesInspect and fix at first-floor height from a stable platform, with the outriggers down on the slab.

Custom options on this lift platform
The 2010 × 830 mm platform is the standard build. A different platform, surface, colour or logo is built to your drawing.

- Platform sizeStandard 2010 × 830 mm; built to the length and width your job needs, within the scissor and outrigger design.
- Platform surfaceA plain steel deck is standard. A checker plate or a coated deck can be specified, and a gate or a drop bar can replace one guardrail section.
- Frame colour and finishRed is standard; a specified colour can be applied to match the equipment already on your site.
- Your logoSend the artwork and your logo is applied before the machine leaves the factory. The marking is confirmed with you before production starts.
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume — this machine is 670 kg and ships on a pallet or in a crate.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How high does it reach?
How is it driven and lifted?
Does it need outriggers?
How big is it when the scissor is down?
What does the platform include?
Can it be used outdoors?
Can the platform size or colour be changed?
What does it cost, and how is freight worked out?
For mobile elevating work platform safety requirements, see OSHA 1926.453, aerial lifts.




Reviews
There are no reviews yet.