Electric Hydraulic Lift Table CartSKU: TMB-LT300-387805726
Battery-powered scissor lift table for loading trucks, vans and pallets. A button press takes the deck to 650 mm, the handle folds flat, and four swivel casters let the cart travel with the vehicle.
- ✓
Held in stock and dispatched from our own warehouse. Custom platform size, material, colour and logo are built to order — see custom options.
- ✓
Built to the specification published here — same frame, deck and power unit on every unit we ship.
- ✓
Nothing ships until you approve the freight quote in writing.
- ✓
Packing list, commercial invoice and bill of lading sent with every shipment.
Built for one job: raising loads to truck-bed height
Six things this electric hydraulic lift table cart does that a manual table truck cannot. All of them are standard on the model — none is optional equipment.
01Powered lift at a button press
An electric hydraulic power unit — motor, oil reservoir and cylinder — raises the platform without manual pumping. Load at ground level, press the button, and the deck arrives at working height.
02650 mm lift matches light-truck beds
Load cartons at ground level, raise the deck level with a pickup or light-truck bed, then slide them across — no carrying loads up to the bed, no tail lift, no second person.
03Padded handle that folds flat
The push handle is foam-padded for grip and folds down onto the platform, so the electric hydraulic lift table cart rolls under a bench and stands upright in a corner when the job is done.
04Four red swivel casters
Wear-resistant rubber wheels on bolted steel brackets roll on warehouse epoxy floors, concrete yards and paved forecourts, and steer the loaded cart in tight aisles.
05Battery gauge and emergency stop
A digital battery display shows the charge left, and the keyed switch and emergency stop sit together at the handle, so the operator can cut power without stepping away from the load.
06Galvanised platform, steel frame
A galvanised steel deck with a raised edge, steel scissor legs and a welded base frame — built for outdoor yards and wet loading bays as well as indoor floors.
Electric hydraulic lift table cart 300kg: full technical data
Dimensions are factory-measured. Ask us for a drawing if you need to check clearance against a specific vehicle or doorway.
Performance
| Rated load capacity | 300 kg / 660 lb |
| Max platform height | approx. 650 mm / 25.6 in |
| Lifting mechanism | Single scissor, hydraulic cylinder |
| Power source | Battery-driven electric hydraulic pump |
| Lifting / lowering | Push-button, powered both ways |
Dimensions & build
| Platform size | 1000 × 700 mm / 39.4 × 27.6 in |
| Overall length (handle down) | 1250 mm / 49.2 in |
| Overall width | 700 mm / 27.6 in |
| Machine weight | approx. 59 kg / 130 lb |
| Platform material | Galvanised steel |
| Frame material | Welded steel, powder coated |
| Wheels | 4 swivel casters, red rubber |
| Handle | Foldable, padded grip |

Packing & options
| Packing | 1 unit per export carton, palletised |
| Colour | Standard finish, custom on request |
| Material | Galvanised steel or specified |
| Platform size | 1000 × 700 mm or custom |
All figures above are for this model only and are factory-measured. Manually measured dimensions may vary slightly; refer to the actual machine.
How the 650 mm lift is actually made
Three parts do the work: the scissor leg set, the hydraulic power unit behind the control box, and the welded base frame that keeps the load stable at full height.

Single scissor, hydraulic cylinder
One scissor leg set on each side, driven by a hydraulic cylinder. The X pattern keeps the platform horizontal through the full 650 mm stroke, so a loaded carton does not slide as the deck rises.
- Platform stays level from ground to full height
- Powered lift and powered lowering — no manual release valve
- Rated working load clearly stated in the specification

Battery hydraulic power unit
The motor, reservoir and cylinder sit in one compact unit inside the base frame, under the control box. Because it is battery-driven, there is no mains cable trailing across a loading bay while you work.
- Self-contained unit — no external power pack
- Mounted inside the frame, protected from knocks
- Charged from a standard socket before the shift

Welded base frame and galvanised deck
The base is a welded steel rectangle carrying all four casters, which is what keeps the electric hydraulic lift table cart stable with the deck raised to full height. The deck is galvanised with a raised edge.
- Four casters on one welded frame — stable under load
- Galvanised deck with a lip to stop cartons sliding off
- Powder-coated frame for outdoor yards
Electric hydraulic lift table cart: powered lift from ground level to truck-bed height
Goods are loaded onto the platform at ground level, by hand or with the handling equipment already on site. An on-board battery then drives the hydraulic lift, raising the loaded deck to the height of a truck bed at the press of a button. The deck stays level through the full stroke, lowers again under power, and the cart rolls away on four swivel casters — the climb up to the bed is powered, not carried.
- Loads at ground level, unloads level with the truck bed
- Powered lift removes the climb to bed height — no ramp, no tail lift
- Rolls between vehicles and loading bays on four swivel casters
One cart, three daily jobs
Truck loading, depot transfer and furniture delivery account for most of the orders we ship. The same cart covers all three.
Raise to bed height, push across
Cartons are loaded onto the deck at ground level, raised to truck-bed height and pushed straight across. The powered lift takes over the high part of the move.
Soft goods and white goods
Furniture, appliances and exhibition crates are loaded onto the deck at ground level and raised to tailgate height, then pushed across without carrying them up to the vehicle.
Racking to vehicle in one trip
Roll a full stack from the racking to the vehicle in one movement, then fold the handle and store the cart against the wall.
Custom options on this electric hydraulic lift table cart
The 1000 × 700 mm cart described above is the version held in stock. When the deck, the materials, the finish or the branding need to match your own equipment, the same model is built to your specification.

- Platform sizeStandard deck 1000 × 700 mm; built to the length and width your pallets, crates or vehicle bed need.
- Material optionsStandard build: galvanised steel deck, powder-coated welded steel frame and rubber casters. Materials can be specified for your working environment.
- Frame colour and finishA powder-coated welded steel frame is standard. A specified colour can be applied so the cart matches your fleet or the equipment already on site.
- Your logoSend the artwork and your logo is applied before the cart leaves the factory. The marking is confirmed with you before production starts.
Lift table cart vs manual table vs forklift vs loading ramp
If your loads sit within the cart's rated capacity and the vehicle changes every day, the powered cart is the cheapest way to take the climb to vehicle height out of the job.
| This lift table cart | Manual hydraulic table | Forklift | Loading ramp | |
|---|---|---|---|---|
| Lifting effort | Powered, button press | Foot or hand pump | Powered | Push or winch |
| Typical capacity | 300 kg | 150–500 kg | 1500 kg + | 200–500 kg |
| Works with any vehicle | Yes — matches bed height | Yes | Needs a dock or yard | Needs a flat tailgate |
| Travels with the vehicle | Yes, folds flat | Yes | No | Yes, but bulky |
| Operator licence | Not required | Not required | Required | Not required |
| Best for | Daily van and truck loading | Low-volume indoor use | Palletised yard work | Wheeled goods only |
Freight is quoted separately and confirmed before dispatch
We ship worldwide by sea (LCL and FCL) and by air or express for sample orders. Freight is priced per destination because it depends on port, weight and volume.
-
You place the order online
Your order is recorded and the machine is reserved for you while the freight is quoted.
-
We send a freight quote in 24–48 hours
Priced to your nearest port, with transit time, or to your door as DDP if you prefer.
-
You confirm and pay the freight
One invoice for the shipping cost. Nothing is dispatched until you approve it.
-
We book, load and send documents
Packing list, commercial invoice and bill of lading go to your email, with photos of the packed goods.
Frequently asked questions
How much can this electric hydraulic lift table cart lift?
How high does it lift, and which vehicles does it fit?
How is it powered?
Will it fit through a doorway or into a van?
Can the platform size or colour be changed?
How do I get a price, including freight?
For powered industrial truck safety requirements, see OSHA's powered industrial trucks guidance.








